|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
03-07-2017, 07:23 PM | #1 |
Not Yet Wild
Join Date: Aug 2015
Posts: 65
|
My 1995 DS project.
Hey everyone.
Just getting my 95 DS ready for the camping season. I have a question. How tight should these nuts be? While lubing up the cart I use to get grease coming out of the top of these. They were pretty loser I tightened them a bit but now Grease does not come out. I never installed the lift so I'm not sure how tight to go. Thanks for any advice. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-07-2017, 07:28 PM | #2 |
Not Yet Wild
Join Date: Aug 2015
Posts: 65
|
Re: My 1995 DS project.
And the pics are sideways cause I'm an idiot. The Nut I am talking about is the locking one on the black "pipe" looking with the zerk for greasing..
|
03-08-2017, 12:39 AM | #3 |
Gone Wild
Join Date: May 2016
Posts: 373
|
Re: My 1995 DS project.
Sweet cart bro. No expert here.......but I'm sure the grease is fine....if your worried about it, loosen it back up until the grease flows from under the nut again......then re tighten...
|
03-08-2017, 09:23 PM | #4 |
Not Yet Wild
Join Date: Aug 2015
Posts: 65
|
Re: My 1995 DS project.
Hey thanks man! Yeah I thought the same just don't want to have a break down over something silly!
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
1995 txt | Electric EZGO | |||
1995 Ez Go Gas Help | Gas EZGO | |||
1995 ez go gas | Gas EZGO | |||
1995 G14 value... | Gas Yamaha |