|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
05-18-2017, 01:04 PM
|
#1 |
|
Gone Wild
Join Date: Nov 2012
Posts: 334
|
DCS 36 Volt no Solenoid click
Hello everyone, I have went through this cart with the trouble shooting guide. I changed the it's and the solenoid. Seems like all these test are showing good numbers to me. What else am I missing??? Is there a way to check the f&r switch??? Help please
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-18-2017, 01:11 PM
|
#2 |
|
Getting Wild
Join Date: Dec 2012
Posts: 126
|
Re: DCS 36 Volt no Solenoid click
This pdf from fsip is a good troubleshooting guide.
http://www.fsip.biz/Documents/EZGO%2...LESHOOTING.pdf |
|
|
|
|
05-18-2017, 01:14 PM
|
#3 |
|
Getting Wild
Join Date: Dec 2012
Posts: 126
|
Re: DCS 36 Volt no Solenoid click
jack up rear of cart before doing the tests!
|
|
|
|
|
05-18-2017, 01:34 PM
|
#4 |
|
Gone Wild
Join Date: Nov 2012
Posts: 334
|
Re: DCS 36 Volt no Solenoid click
Something weird just happened. I was checking voltage on the small terminals and pressing the pedal. All of a sudden it clicked and started running. I put it in reverse and nothing again. So forward and reverse has no go again.
|
|
|
|
|
05-18-2017, 02:20 PM
|
#5 |
|
Gone Wild
Join Date: Aug 2014
Location: fletcher,nc
Posts: 601
|
Re: DCS 36 Volt no Solenoid click
f/r can have bad/burnt connection...u can try snugging the center nut-see if it helps or get a hd unit from carts unlimited and never worry again like i did-other hd units are not the same....
|
|
|
|
|
05-18-2017, 02:22 PM
|
#6 |
|
Gone Wild
Join Date: Nov 2012
Posts: 334
|
Re: DCS 36 Volt no Solenoid click
I will look into the f&r right now. See if I can tell if it is the issue
|
|
|
|
|
05-18-2017, 02:25 PM
|
#7 |
|
Gone Mad
 Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: DCS 36 Volt no Solenoid click
Don't bother. The nut on the FNR ONLY affects the high current circuit. It will not affect the low current circuit, which is where you need to focus, as you currently have "no Solenoid click".
|
|
|
|
|
05-18-2017, 02:41 PM
|
#8 |
|
Gone Wild
Join Date: Nov 2012
Posts: 334
|
Re: DCS 36 Volt no Solenoid click
Gotcha. I have no idea what could be causing my issue
|
|
|
|
|
05-18-2017, 02:49 PM
|
#9 |
|
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: DCS 36 Volt no Solenoid click
I'd start by connecting your black meter lead to pack negative, then follow the positive from the charger port, through the various switches. I'd start where you were testing when it started working, as you may have a loose connection.
|
|
|
|
|
05-18-2017, 02:53 PM
|
#10 |
|
Gone Wild
Join Date: Nov 2012
Posts: 334
|
Re: DCS 36 Volt no Solenoid click
All I did was put my meter to the small terminals on the solenoid and all of a sudden it clicked then put in reverse and no run at all since that moment
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 48 volt TXT 2011 does nothing, no solenoid click | Electric EZGO | |||
| 98 club car 48 volt won't move no click at solenoid | Electric Club Car | |||
| 36 volt DS was running. Now no Solenoid click | Electric Club Car | |||
| Should the solenoid click w/key | Electric EZGO | |||
| solenoid does not click | Electric EZGO | |||
Linear Mode
