|
|
|||||||
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
04-10-2017, 12:45 PM
|
#1 |
|
Not Yet Wild
Join Date: Apr 2017
Posts: 4
|
F/R Cable not working to change gears
When we took our 2005 TXT out of storage, we noticed that it wasn't changing gears. It would go forward, but we couldn't make it go into neutral or reverse. This was not an issue last year.
We noticed the F/R cable was frayed, and replaced it. At the gear box, there is a nut to tighten or loosen the F/R connection. If it's too far in, the cart can go into neutral or reverse, but not forward. If it's out a bit, it can go forward or neutral, but not reverse. We have confirmed with the dealer that the part they ordered is correct. All else seems to be working normally. Any thoughts? |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-11-2017, 02:24 PM
|
#2 |
|
Gone Wild
Join Date: May 2010
Location: Plainwell mi but from Ohio GO BUCKS!!!
Posts: 167
|
Re: F/R Cable not working to change gears
Is the lockout in the out position? There's a spring loaded lockout that needs to be pulled out then turned to unlock.
|
|
|
|
|
04-13-2017, 11:13 AM
|
#3 |
|
Getting Wild
Join Date: Sep 2013
Location: Texas
Posts: 106
|
Re: F/R Cable not working to change gears
Can you explain "lockout" ? I have the same issue. have not been able to adjust cable to do both reverse and forward. Only one or the other.
|
|
|
|
|
04-14-2017, 03:08 PM
|
#4 |
|
Not Yet Wild
Join Date: Apr 2017
Posts: 4
|
Re: F/R Cable not working to change gears
Yep, not sure what the lockout is either. There's a spring on the part that raises and lowers for changing gears - does that somehow lock?
|
|
|
|
|
04-16-2017, 11:19 PM
|
#5 |
|
Gone Wild
Join Date: May 2010
Location: Plainwell mi but from Ohio GO BUCKS!!!
Posts: 167
|
Re: F/R Cable not working to change gears
It's a neutral safety lockout it's right down where the pivot springs and cable is. I've been trying to find a picture but I haven't had any luck. Mine eas engaged and I could only go forward.
|
|
|
|
|
04-16-2017, 11:36 PM
|
#6 |
|
Gone Wild
Join Date: May 2010
Location: Plainwell mi but from Ohio GO BUCKS!!!
Posts: 167
|
Re: F/R Cable not working to change gears
|
|
|
|
|
04-17-2017, 09:45 AM
|
#7 |
|
Not Yet Wild
Join Date: Apr 2017
Posts: 4
|
Re: F/R Cable not working to change gears
I think I found it, and it doesn't solve it. It can still go forward, but not reverse.
|
|
|
|
|
04-17-2017, 03:19 PM
|
#8 |
|
Getting Wild
Join Date: Sep 2013
Location: Texas
Posts: 106
|
Re: F/R Cable not working to change gears
Ok , this is not my issue either, it seems my issue is at the differential , I can adjust cable so it can either go reverse / neutral or forward neutral but cannot adjust so it moves the direction shifter at the differential from reverse to forward.
|
|
|
|
|
04-17-2017, 07:13 PM
|
#9 |
|
Getting Wild
Join Date: May 2016
Posts: 122
|
Re: F/R Cable not working to change gears
Sounds like the throw on your control lever somehow got shortened. Any slop or loose connections there?
|
|
|
|
|
04-18-2017, 10:13 AM
|
#10 |
|
Not Yet Wild
Join Date: Apr 2017
Posts: 4
|
Re: F/R Cable not working to change gears
Doesn't seem so, although it's actually very stiff.
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| How to? or Any additional parts to change G22 Gears? | Gas Yamaha | |||
| RXV not working after battery change | Electric EZGO | |||
| Battery change, lights no longer working | Electric Club Car | |||
| Cable change | Electric EZGO | |||
| change club car rear end gears | Electric Club Car | |||
Linear Mode
