|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
07-18-2012, 09:16 PM
|
#1 |
|
Getting Wild
Join Date: Jul 2012
Location: TX
Posts: 80
|
48 volt pds controller 36 volt pds motor
I have a 07 workhorse with a 48 volt pds II system. It comes stock with a 48volt 400 amp controller I am thinking about putting a 36 volt PDS motor in it for two reasons, first is the motor is free and second is I have read on here several times where it has been done with aftermarket 400 amp controllers. I can get a 500 amp controller, but I would think the 400 amp should be fine. Am I right in my thinking? The reason for 36 volt motor is when I got the cart the motor was missing.
Sorry for the long winded question, but this is my first build. Any info is much appreciated. |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-18-2012, 10:36 PM
|
#2 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 48 volt pds controller 36 volt pds motor
That will work just fine.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 48 volt cart, 36 volt motor? | Electric Club Car | |||
| 36 volt motor to a 48 volt cart | Electric Club Car | |||
| need controller for 48 volt | Golf Carts and Parts | |||
| 400 Amp Curtis Controller 36 Volt and 36 volt HD Solenoid | Golf Carts and Parts | |||
| 36 volt controller | Golf Carts and Parts | |||
Linear Mode
