|
Big Block Talk! Everything about swapping a big block engine into your cart! |
|
Thread Tools | Display Modes |
|
05-06-2020, 09:55 AM | #1 |
Not Yet Wild
Join Date: Sep 2015
Posts: 7
|
B&S Vanguard 23 upgrade
So I went with a B&S 23 hp twin for my 1989 Club Car. Installed the high rev kit. Now the engine bogs down whenever I give it gas.Is Is this the usual for this engine with this upgrade? The engine is new and did not do this prior to the upgrade. Any thoughts would be appreciated.
|
05-06-2020, 02:42 PM | #2 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,436
|
Re: B&S Vanguard 23 upgrade
Sounds like something got connected incorrectly when you reassembled the engine. Vacuum line comes to mind.
|
05-07-2020, 12:21 PM | #3 |
Not Yet Wild
Join Date: Sep 2015
Posts: 7
|
Re: B&S Vanguard 23 upgrade
|
05-08-2020, 07:27 AM | #4 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,436
|
Re: B&S Vanguard 23 upgrade
I know on mine, there is a large vacuum tube at the top of the carb. It was plugged with a rubber cap out of the box when new. I left that cap on thinking it was supposed to be there. Couldn't find anything about it. Wouldn't run well at all. I removed that cap and it ran perfect.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Carb Upgrade for 20 hp vanguard | Big Block Talk! | |||
Drive Train Upgrade After Wheel Upgrade? | Electric Club Car | |||
18hp vanguard upgrade parts | Big Block Talk! | |||
Looking to upgrade to a 23 HP Vanguard | Big Block Talk! | |||
18 HP Briggs and Stratton Vanguard Upgrade | Gas EZGO |