|
Gas Club Car Gas DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
02-20-2009, 10:34 PM | #1 |
Not Yet Wild
Join Date: Jan 2009
Posts: 3
|
1990 Piston and head questions
I have a 90 Club car I bought that was seized up. The cam gear came apart. I have a new cam and am ready to reassemble. The piston is marked with R an L. Can someone tell me which side the r points to?
Also what do the head bolts torque to? Other than that I think I am ready to do it. Thanks, Jim |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-21-2009, 01:33 PM | #2 |
Golf Cart Photographer
Join Date: Jan 2007
Location: Wichita Falls Texas - My Ride 2010 Club Car
Posts: 6,236
|
Re: 1990 Piston and head questions
Hello ugla and Welcome to the forum.
One of the Gasoline Engine techs should be along here any time to assist. |
02-21-2009, 04:04 PM | #3 |
Not Yet Wild
Join Date: Jan 2009
Posts: 3
|
Re: 1990 Piston and head questions
Ok, I found most of the info I need on the web. I have head torque and line up of balance and cam shaft.
One question. Can anyone tell me about the alignment of the cam shaft? I can align the marks on the gears two ways. That could cause the ignition to fire 180 degrees off. How do I decide which rotation of the cam to align the dots? Thanks, |
|
|
Similar Threads | ||||
Thread | Forum | |||
My 1990 G8 16hp Chinese Honda Build and Questions | Big Block Talk! | |||
What could cause piston rings to break? | Gas EZGO | |||
EZ go piston and rods | Gas EZGO | |||
244 piston size | Gas EZGO | |||
244 blown piston | Gas EZGO |