|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-27-2018, 10:26 AM | #1 |
Not Yet Wild
Join Date: Jul 2018
Location: Indiana
Posts: 38
|
2008 ST 2+2 LED Conversion Project
I don't know if this is the right place to post this thread, but just wanted to help others with ST's if I can.
In the town I live by they require headlights, tail lights, brake lights and turn signals. I'm a little handy and do some wood working so I decided to buy the GTW LED light kit for a TXT and convert it to fit my ST 2+2. Everything from the kit fit perfect except the headlights and front turn signals. For those I purchased off Amazon a 1/2"x12"x24" piece of black polycarbonate. I picked 1/2" think so that I could trap the LED headlight inside it and clamp it in with machine screws and washers on the backside. To mount the headlights I just used machine screws and drilled into the cowl where there seemed to be some good meat. I did drill a few 1" holes into the headlight pocket for the wiring and for venting. I also cut a piece to fit right in place of the old turn signal and utilize the old turn signal mounting. I had to counterbore a hole for the new turn signal because it uses a single post with a nut to mount it. The other issue I had with the kit is the turn signal switch. They provide some foam pieces to make up the difference of the column diameter (they suck). I ended up cutting an old bicycle tube in half and wrapping it around until I got a good fit. Now it is nice and secure to the column. Another lighting item I added are backup lights. I found two LED license plate lights and mounted them under the rear foot rest. Then wired them to the back up buzzer. If anyone out there has access to a mill or machining center these headlight mounts could easily be produced. If I did it all over again, I would have headlight mounting screws come in from the back side rather then the front like I did on this one. It's not the best job but my wife is happy that she can cruise into town without problems. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-27-2018, 10:31 AM | #2 |
Not Yet Wild
Join Date: Jul 2018
Location: Indiana
Posts: 38
|
Re: 2008 ST 2+2 LED Conversion Project
Last edited by mersh75; 08-27-2018 at 10:34 AM.. Reason: pics |
08-27-2018, 10:16 PM | #3 |
Gone Wild
Join Date: Feb 2009
Location: Sanger, Ca.
Posts: 1,689
|
Re: 2008 ST 2+2 LED Conversion Project
Looks nice.
|
08-28-2018, 01:53 PM | #4 |
Gone Wild
Join Date: Jul 2011
Location: Rhode Island
Posts: 489
|
Re: 2008 ST 2+2 LED Conversion Project
Looks great. I wish a company would produce some LED models.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2008 EZGO RXV - Curtis Controller Conversion | Electric EZGO | |||
Charging Issue on a 2008.5 Precedent with 4-12v to 6-8v Conversion | Electric Club Car | |||
2008.5 CC Precedent 4-12v conversion to 6-8v? | Electric Club Car | |||
2008 4x12 to 6x8 batt conversion? | Electric Club Car | |||
2008 EZGO PDS to Series Conversion | Electric EZGO |