|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-31-2015, 07:30 PM | #1 |
Not Yet Wild
Join Date: Aug 2015
Posts: 9
|
EZGO Solenoid not clicking
I just got a 36 volt 96 EZGO TXT (Series) cart. Cart has been sitting for a couple of years. Put new batteries in and the cart will not move. The solenoid does not click when the pedal is pressed. I jumped the solenoid and it clicks and the cart will move in reverse with the solenoid jumped. But it will not move forward when the solenoid is jumped. I plan to remove and clean all connections at the F&R switch (didn't have time today), but wanted to see if anyone can direct me beyond that. Thanks for the help.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-01-2015, 06:13 AM | #2 |
Master of All Things
Join Date: May 2013
Location: West Columbia, Texas
Posts: 18,001
|
Re: EZGO Solenoid not clicking
while you are cleaning the F&R connections, go head and clean ALL if the High Current connections. Then if the solenoid still doesn't engage, look at all the connection of the activation circuit.
Wiring Diagram Series with Solenoid Activation Traced.JPG |
09-01-2015, 08:39 AM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: EZGO Solenoid not clicking
May be one or 2 problems. Check the power (+) supply to the F&R micro switch on the F&R on the drivers side. If power in check for power out in both F&R positions.
|
09-01-2015, 07:13 PM | #4 |
Not Yet Wild
Join Date: Aug 2015
Posts: 9
|
Re: EZGO Solenoid not clicking
OK. took off and cleaned all connections on F&R. I have 38 volts on both sides of the MS2 microswitch when I press the pedal and the lever is in the front position. There is 38 volts on both sides of the same microswitch when in the rear position and pedal is NOT pressed. I have 38 volts on both sides of the MS4 microswitch when the lever is in the rear position and pedal is NOT pressed. I have 38 volts on the MS4 microswitch on the orange wire and no voltage on the other post when the lever is in the front position, but when I press the gas, it closes the circuit and there's 38 volts on the red wire on the microswitch. I have no idea...
|
09-01-2015, 07:17 PM | #5 |
Not Yet Wild
Join Date: Aug 2015
Posts: 9
|
Re: EZGO Solenoid not clicking
i don't know if it matters, but that's with the red (+) volt meter lead on the positive battery terminal and the black volt meter lead probing the switches. I don't get anything when done the other way. Also, after cleaning the F&R the cart will no longer go in reverse like it did before when i jumped the solenoid. Now when i jump the rear buzzer will sound, but it will not go like it did before????
|
09-01-2015, 07:53 PM | #6 | |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: EZGO Solenoid not clicking
Quote:
at all times you should have + at the red wire to the F&R ms closest to the drivers side. No? fix it. Yes? see if + goes to the blue wire on other side of the switch when lever in Forward. No? replace switch. Yes? see if + to the small (yellow wire PDS) or red wire series on solenoid small terminals. No? check key switch and pedal micro switch. The solenoid will click when there is 36v between the solenoid 2 small terminals. No? replace solenoid. Yes .... |
|
09-01-2015, 08:11 PM | #7 |
Not Yet Wild
Join Date: Aug 2015
Posts: 9
|
Re: EZGO Solenoid not clicking
thats the problem then. No + power at red wire on ms switch. This is a cart that i got that has been sitting for a couple years. maybe someone wired something wrong..
|
09-01-2015, 08:20 PM | #8 |
Not Yet Wild
Join Date: Aug 2015
Posts: 9
|
Re: EZGO Solenoid not clicking
Bad connection at the red wire at the charger port. Simply twisted back together for now and solenoid clicks now when pedal pressed and back beeper sounds properly, but no movement forward or reverse.
|
09-01-2015, 09:44 PM | #9 |
Not Yet Wild
Join Date: Aug 2015
Posts: 9
|
Re: EZGO Solenoid not clicking
Also had bad connection with the F&R switch. I wasn't getting any power at 3 of the main posts. Was able to loosen the posts up some so that made better connection and all had 38 volts and cart moved forward and reverse. I actually created that problem myself because i snugged all bolts/nuts down when i removed the switch to clean it and ended up pulling the bolts to far to make contact. Anyway, i appreciate all the help.
|
09-01-2015, 10:48 PM | #10 | |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: EZGO Solenoid not clicking
Quote:
|
|
|
|
Similar Threads | ||||
Thread | Forum | |||
'97 Ezgo solenoid not clicking & weird voltages | Electric EZGO | |||
91 EZGO TXT won't go, solenoid not clicking. | Electric EZGO | |||
98 EZGO TXT Clicking Solenoid | Electric EZGO | |||
1999 EZGO TXT Solenoid Not Clicking | Electric EZGO | |||
solenoid not clicking | Electric Club Car |