Handle HELP!!!

mgray70 · 06-10-2016, 10:18 AM

I think he is talking about the handle itself. They tend to seize onto the shaft.

06-10-2016, 10:26 AM

never had one stick ... but you can remove the roll pin and pull handle and shaft off ... if you do need to cut handle off i have a few i could send you

Mose · 06-10-2016, 12:36 PM

Quote:

Originally Posted by crash test dummy

never had one stick ... but you can remove the roll pin and pull handle and shaft off ... if you do need to cut handle off i have a few i could send you

I'll try that before I cut it off. Thanks for the replies, they make me want to get a Jeep for some reason.

06-10-2016, 02:00 PM

Swan · 06-10-2016, 02:07 PM

remember that there is spring tension that the roller pin is holding back . when you remove it be ready to catch

Mose · 06-10-2016, 08:53 PM

Cut that son of a gun off. Got her hooked back and running good. Using vise grips for handle till I have time to free the old one. Just trying to get this thing right before I sell it. Thanks for the replies.
P.S.
The coils seem to get hot to the touch and the fifth solenoid lug is warm. Is this normal?

mgray70 · 06-10-2016, 10:12 PM

Quote:

Originally Posted by Mose

Cut that son of a gun off. Got her hooked back and running good. Using vise grips for handle till I have time to free the old one. Just trying to get this thing right before I sell it. Thanks for the replies.
P.S.
The coils seem to get hot to the touch and the fifth solenoid lug is warm. Is this normal?

Coils are suppose to get hot like a toaster. The solenoid is probably o.k. If it's just warm.

Htownblue · 06-11-2016, 11:42 AM

Use a reverse drill bit and drill into the top of the screw if you are replacing the entire assembly. Even if not it will allow you to get it off and use a need nose vice grip to loosen the remainder of the screw from the hole. That's what I've done quite a few times.

06-10-2016, 10:26 AM	#12
crash test dummy Guest Posts: n/a	Re: Handle HELP!!! never had one stick ... but you can remove the roll pin and pull handle and shaft off ... if you do need to cut handle off i have a few i could send you
crash test dummy Guest Posts: n/a

06-10-2016, 02:00 PM	#14
crash test dummy Guest Posts: n/a	Re: Handle HELP!!!
crash test dummy Guest Posts: n/a

06-10-2016, 02:07 PM	#15
Swan Cave Dweller Join Date: Apr 2013 Location: Always On The Move Posts: 22,239	Re: Handle HELP!!! remember that there is spring tension that the roller pin is holding back . when you remove it be ready to catch

06-10-2016, 08:53 PM	#16
Mose Not Yet Wild Join Date: Jul 2015 Posts: 20	Re: Handle HELP!!! Cut that son of a gun off. Got her hooked back and running good. Using vise grips for handle till I have time to free the old one. Just trying to get this thing right before I sell it. Thanks for the replies. P.S. The coils seem to get hot to the touch and the fifth solenoid lug is warm. Is this normal?
Mose Not Yet Wild Join Date: Jul 2015 Posts: 20

06-11-2016, 11:42 AM	#18
Htownblue Gone Wild Join Date: May 2015 Location: Houston Posts: 903	Re: Handle HELP!!! Use a reverse drill bit and drill into the top of the screw if you are replacing the entire assembly. Even if not it will allow you to get it off and use a need nose vice grip to loosen the remainder of the screw from the hole. That's what I've done quite a few times.

06-10-2016, 10:18 AM	#11
mgray70 Gone Wild Join Date: Apr 2013 Location: Deep Run, NC Posts: 2,544	I think he is talking about the handle itself. They tend to seize onto the shaft.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
fnr handle	Electric EZGO
Shifter handle	Members Rides
G2 F/R handle	Gas Yamaha
F-N-R handle	Gas Club Car
F/R Handle	Gas Yamaha