|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
10-22-2016, 08:51 AM
|
#1 |
|
Not Yet Wild
Join Date: Jan 2016
Posts: 46
|
need a new controller
Well it looks like my controller went out. What is the best controller for my buggy and where is the best place to purchase one? It looks pretty simple to replace one,thanks for any info and help
2001 ez go 36v txt standard PDS  |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
10-22-2016, 09:02 AM
|
#2 | |
|
Gone Wild
Join Date: Dec 2015
Location: Texas
Posts: 526
|
Quote:
Alltrax XCT controller. Scottyb on this message board sells them. www.cartsunlimited.net Sent from my Nexus 6 using Tapatalk |
|
|
|
|
|
10-22-2016, 09:23 AM
|
#3 |
|
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,168
|
Re: need a new controller
I second that motion. Get Alltrax controller. Very flexible and you are not limited to the behavior of a stock one.
|
|
|
|
|
10-22-2016, 09:40 AM
|
#4 |
|
Not Yet Wild
Join Date: Jan 2016
Posts: 46
|
Re: need a new controller
Is it a plug and play type deal? I noticed there are different amps for the controller,what is the standard amp for my buggy? Thanks
|
|
|
|
|
10-22-2016, 10:31 AM
|
#5 | |
|
Techno-Nerd
 Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: need a new controller
Quote:
Mechanically, you have to use and adapter to mount an XCT to the stock heatsink and you have to relocate the Run/Tow switch, however with there is a solenoid mounting kit that has a hole in it for the R/T switch. With the mounting adapter for the controller and the solenoid bracket with the hole for the R/T switch, it is a simple install. A stock 36V PDS controller is 300A and a stock 36V PDS motor can tolerate about 400A, so go with a XCT48400PDS (400A) or XCT500PDS (500A) and turn it down to 400A. |
|
|
|
|
|
10-22-2016, 03:48 PM
|
#6 |
|
Not Yet Wild
Join Date: Jan 2016
Posts: 46
|
Re: need a new controller
Thanks Johnnie,emailed ScottyB about controller
|
|
|
|
|
10-22-2016, 10:21 PM
|
#7 |
|
Not Yet Wild
Join Date: Sep 2016
Location: Houston, Texas
Posts: 18
|
Re: need a new controller
When you buy from scottyb he will see you detailed instructions and be there for any questions you have. It pretty straightforward just mark your cables and take your time. Scotty has the best customer service I've seen in a long time.
|
|
|
|
|
10-22-2016, 11:07 PM
|
#8 |
|
Not Yet Wild
Join Date: Oct 2016
Posts: 55
|
Re: need a new controller
and fast shipping....I ordered a new controller late Wed night. I had a tracking number Thursday morning and got it on Saturday. That was California to Georgia too.
|
|
|
|
|
10-23-2016, 01:13 PM
|
#9 |
|
Gone Wild
Join Date: Jul 2009
Location: Lake Elsinore Ca.
Posts: 549
|
Re: need a new controller
nothing but good to say to say about Scotty, if he has the item he gets my business.
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| a DC motor controller ( electronic speed controller) | Golf Carts and Parts | |||
| RXV controller not responding to upgrade handheld device to program controller | Electric EZGO | |||
| Plum Quick Bandit + 500 AMP Controller OR Executioner w/ Stock Controller | Electric Club Car | |||
| Trade 400 amp 36v Curtis controller for 500 amp or higher 48v controller | Golf Carts and Parts | |||
| Did lift kit cause controller to die? What are controller options? 95 EZGO 25864G05 | Electric EZGO | |||
Linear Mode
