Alltrax SR 48500 - No LED

[RWK1]

I recently installed the SR 48500, a 400aSOL and an HD F&R switch. The cart worked as it should and I had no issues. I went to drive the cart last night and the cart would not respond. The batteries have a full charge, there are no bad connections/cut wires that I can see, and feel that I have tested most of what I know how to test. My solenoid does not click but has power and my controller stat light does not come on.

Could the issue be in the pedal switch? Is the controller bad (I hope not because it's brand new and was working just fine)?

HELP!

2002 Series 36v EZGO TXT

[JohnnieB]

Sounds like you aren't getting B+ to the solenoid. (which also powers up the controller)

Could be reed switch, MS2 on F/R switch assembly, Keyswitch or Pedal switch. Or it could be a bad wire or connection in the series chain.

Here's is a schematic of a SR in a Series drive with the B+ to solenoid and controller highlighted.

[RWK1]

I really appreciate the feedback. I checked the reed switch and it appeared OK. When I turn the key on, my headlights still come on. Would this rule out the key switch or could it still be the issue?

I will take a look at the other options and see if I can find anything. Thanks again!

[JohnnieB]

Headlight are on a different set of contacts, so the keyswitch might be bad.