|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
12-05-2017, 11:32 AM | #1 |
Gone Wild
Join Date: Oct 2017
Location: San Diego Ca.
Posts: 289
|
Better wiring ideas ?
From another post he suggested for testing under load while driving .
. So I'm guessing can i move my Pos' Ignition and volt meter wires down to the back side of the charge port to get them out of the acid and high corrosion environment and a lot less wires to handle with on the two post i take off and on the most . . with dundee's help from another post i have already moved the all Neg's to charge ports backside ... and the Pos' to the solenoid Pos' post , but down to the charge port would be even a shorter and cleaner route . |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Looking for ideas | Gas Yamaha | |||
wiring ideas for power port and future addtions | Gas Club Car | |||
new kid needs g1 ideas | Gas Yamaha | |||
Any ideas before i rip it apart? | Gas EZGO |