|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
02-04-2018, 10:55 AM | #1 |
Gone Wild
Join Date: May 2016
Location: Central Alabama
Posts: 1,049
|
'96 to '97 wiring harness compatibility
I have a 96 DS, 48 (volt series), runs well, but frame damage. I have a 97 DS (48v sepex regen) with a good chasis, bad controller.
If I were to move the motor and controller, switch, etc., from the 96 DS to the 97 DS chasis, would I have to also move the wiring harness or could I simply use the harness that is already on the 97? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-04-2018, 10:57 AM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: '96 to '97 wiring harness compatibility
You would move everything including the OBC and wire harnesses.
|
02-04-2018, 11:19 AM | #3 |
Gone Wild
Join Date: May 2016
Location: Central Alabama
Posts: 1,049
|
Re: '96 to '97 wiring harness compatibility
|
02-04-2018, 11:26 AM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: '96 to '97 wiring harness compatibility
The swap is from Sepex to series. Everything goes except the V glide and key switch
|
|
|
Similar Threads | ||||
Thread | Forum | |||
WTB: G2/G9 gas wiring harness | Golf Carts and Parts | |||
Wiring Harness Help | Electric EZGO | |||
New Wiring Harness | Gas Club Car | |||
wiring harness id, PLEASE HELP | Electric EZGO | |||
G16 wiring harness with key $50 | Golf Carts and Parts |