Kids have worn the diff gears down to nubs. Now I get to replace.

kgsc · 07-22-2020, 03:41 PM

Part number should be 601064 if it is the Dana

rangermonroe · 07-22-2020, 05:52 PM

got it . Thank you very much

rangermonroe · 07-30-2020, 09:19 PM

Got all the parts over the past few days. Got around to putting things in today.

How's this for fun? Ring gear on the diff wouldn't mesh with the reduction gear. Counted teeth... 24 v 26.

The old "output" gear wasn't trashed on the old intermediate. Just the big gear. A little heat, some quality time in the press and 'Viola!

Except the new big "input'' gear has two slots for roll pins and the old one has only one groove. Problem?

Thank goodness I have a milling machine and a dividing head. ******.

cgtech · 07-31-2020, 07:03 PM

They dont slip even without a pin. You'll be fine.

rangermonroe · 08-04-2020, 09:36 AM

Yeah... maybe...probably...

YOu missed the point that I have a mill. <grins>

Now I have two slots in the shaft.

Things are back together and working flawlessly.

Thank you very much for your help, I am glad that I found this forum.

07-22-2020, 03:41 PM	#11
kgsc Gone Wild Join Date: Dec 2009 Location: Aiken, SC Posts: 13,173	Re: Kids have worn the diff gears down to nubs. Now I get to replace. Part number should be 601064 if it is the Dana

07-22-2020, 05:52 PM	#12
rangermonroe Not Yet Wild Join Date: Jul 2020 Posts: 8	Re: Kids have worn the diff gears down to nubs. Now I get to replace. got it . Thank you very much
rangermonroe Not Yet Wild Join Date: Jul 2020 Posts: 8

07-30-2020, 09:19 PM	#13
rangermonroe Not Yet Wild Join Date: Jul 2020 Posts: 8	Re: Kids have worn the diff gears down to nubs. Now I get to replace. Got all the parts over the past few days. Got around to putting things in today. How's this for fun? Ring gear on the diff wouldn't mesh with the reduction gear. Counted teeth... 24 v 26. The old "output" gear wasn't trashed on the old intermediate. Just the big gear. A little heat, some quality time in the press and 'Viola! Except the new big "input'' gear has two slots for roll pins and the old one has only one groove. Problem? Thank goodness I have a milling machine and a dividing head. ******.
rangermonroe Not Yet Wild Join Date: Jul 2020 Posts: 8

07-31-2020, 07:03 PM	#14
cgtech Over This Interview Is... Join Date: Jun 2012 Location: AZ Posts: 17,449	Re: Kids have worn the diff gears down to nubs. Now I get to replace. They dont slip even without a pin. You'll be fine.

08-04-2020, 09:36 AM	#15
rangermonroe Not Yet Wild Join Date: Jul 2020 Posts: 8	Re: Kids have worn the diff gears down to nubs. Now I get to replace. Yeah... maybe...probably... YOu missed the point that I have a mill. <grins> Now I have two slots in the shaft. Things are back together and working flawlessly. Thank you very much for your help, I am glad that I found this forum.
rangermonroe Not Yet Wild Join Date: Jul 2020 Posts: 8

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
Worn spline on electric motor and diff	Electric EZGO
Par Car Dana Diff Gears??	Columbia ParCar
Nubs rolls 5 bigguns!!!	Announcements