|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
08-10-2020, 11:24 AM | #1 |
Gone Wild
Join Date: Apr 2010
Location: Stringer, MS
Posts: 200
|
YDRE motor issues
measured A1 TO A2 resistance was less than 1 ohmn. F1 to F2, less than 1 ohm. when rolling cart resistance went up from 40 to 50 ohms. Is this correct? Controller was replaced, solenoid was replaced. Cart will start to move and then drop out.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-10-2020, 11:44 AM | #2 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: YDRE motor issues
Sounds more like a battery, or power delivery problem, than a motor problem.
When trying to drive, if you just barely press the pedal & move, how low does the battery pack voltage drop before it cuts out? |
08-10-2020, 11:49 AM | #3 |
Gone Wild
Join Date: Sep 2010
Location: Florida
Posts: 1,895
|
Re: YDRE motor issues
I was thinking along the same lines as cgtech, sounds more to me like a loose connection somewhere as well or perhaps battery issue...when you say drops out do you mean cart just shuts off until you flip run/tow switch or still clicks but no longer moves?(which may point to motor brushes sticking)...also if cart is in run and you push it with the parking brake off does it try and stop itself and beep or just rolls freely?
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Power issues with 2017 YDRE | Electric Yamaha | |||
2012 Yamaha ydre speed issues | Electric Yamaha | |||
08 Ydre speed issues | Electric Yamaha | |||
Yamaha 2006 G29 YDRE just died - Controller Issues? | Electric Yamaha | |||
Need help removing motor on 07 YDRE | Electric Yamaha |