|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-04-2021, 04:14 PM | #1 |
Gone Wild
Join Date: Aug 2017
Location: Archdale NC
Posts: 201
|
12v Reducer from scottie b
Yep, lol I have questions today.
My Veego reducer arrived today, I'm trying to decide on the best location to mount it. I know we want to keep the wiring as short as possible. Are you guys mounting it under the seat? Different location? There's room in the area where the controller is, but not really any drilling spots for mounting. 3m tape to the sides? 2013 ezgo txt 48v. Sent from my SM-N960U using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-04-2021, 07:09 PM | #2 |
Getting Wild
Join Date: Mar 2021
Posts: 82
|
Re: 12v Reducer from scottie b
I installed mine on the opposite side from the controller.
|
06-04-2021, 08:25 PM | #3 |
Gone Wild
Join Date: Aug 2017
Location: Archdale NC
Posts: 201
|
Re: 12v Reducer from scottie b
|
06-05-2021, 08:10 AM | #4 |
Gone Wild
Join Date: Sep 2018
Location: Md.
Posts: 1,059
|
Re: 12v Reducer from scottie b
I have factory on board charger.
Reducer mounted to the back of it. Fuse panel mounted to fender well.😊 |
06-05-2021, 08:33 AM | #5 |
Gone Wild
Join Date: Jan 2013
Location: north east ohio
Posts: 213
|
Re: 12v Reducer from scottie b
I put mine in front the controller box, then I put the fuse block on the opposite side fender well, I left the battery tray open on the other side in case I go to 42v.
|
06-05-2021, 08:46 AM | #6 |
Gone Wild
Join Date: Aug 2017
Location: Archdale NC
Posts: 201
|
Re: 12v Reducer from scottie b
|
06-08-2021, 05:07 PM | #7 |
Getting Wild
Join Date: Jun 2019
Location: Seattle
Posts: 103
|
Re: 12v Reducer from scottie b
There isn’t enough current going to that converter to worry about wiring length, in fact there’s less current going to it at 36 or 48 volts than there is coming out of it at 12 volts.
Just use decent size wire. 12-gauge is probably plenty. |
|
|
Similar Threads | ||||
Thread | Forum | |||
Scottie's 2 wire DVM, Voltage reducer and 3 way key switch. | Electric EZGO | |||
Any down side to using the 16v reducer (2batt) versus the 48v reducer? | Electric Club Car | |||
Dc reducer in a pds | Electric EZGO | |||
best buy for 48v dc reducer | Electric Yamaha | |||
48v reducer to 12v | Electric Yamaha |