How bad did I mess up? Bought wrong light kit

[austinKaratePants]

I bought the Drive2 light kit, but I have a Drive. I didn’t realize the Drive2 when I bought it online. Yes, I am a idiot sometimes. Worst part is, I cut out the holes for the lights, and while dry fitting the lights, they did not sit flush at all. If that wasn’t a red flag enough, I continued to wire up the wiring harness. Then it dawned on me I had the wrong kit.

Now I have Drive2 holes, if I somehow manage to get Drive lights, will the holes be off?

Thanks all!

[slowindown]

Put a a picture of the holes you cut. Let’s compare. There is some room for error but no idea what a hole for drive 2 lights look like.

Here’s pictures from when I cut the holes in my 2013 drive.

[austinKaratePants]

Thanks, Slowindown! I think the holes are pretty close. I ended up doing my penance and instead of eating 280 bucks worth of lights, I broke out the Dremel, heat gun, and sandpaper to do some custom fitting. A few cups of coffee and a couple of jugs of water later, the Drive2 lights don't look half bad.

Here's the before hacking away:

[austinKaratePants]

Here's the aftermath:

[slowindown]

Looks good to me.

[camaroluvz28]

Round here we call that "custom" ... lol good work