How to adjust electrical sounding click when you press gas

XoDiViAoX · 07-23-2010, 07:50 PM

Hi,

I was wondering if anyone could tell me where you adjust whatever makes that electrical click and the golf cart starts up when you press the gas pedal. It was perfect, but something is off now and it is clicking alot where i usually cruise with the gas pedal pressed in at.

Thank you

sabercat · 07-23-2010, 08:13 PM

first off what cart are you on? and its most likely a throttle cable adjustment, you prob need to adjust it so the throttle opens on the carb AFTER you hear that click, and the starter gen startes up.

scottyb · 07-23-2010, 08:14 PM

Lift the floor mat and then the sheet metal access panel by the gas peddle ... you will find the micro switch, maybe it is coming loose?

smallblock450sl · 07-23-2010, 08:24 PM

Quote:

Originally Posted by scottyb

Lift the floor mat and then the sheet metal access panel by the gas peddle ... you will find the micro switch, maybe it is coming loose?

Scottyb, not only are you a Ezgo and Clubcar expert, you are becoming a Yami expert also

That will help you in your business to know all the big three, But then I won't have anything to post

scottyb · 07-23-2010, 08:26 PM

Quote:

Originally Posted by smallblock450sl

Scottyb, not only are you a Ezgo and Clubcar expert, you are becoming a Yami expert also

That will help you in your business to know all the big three, But then I won't have anything to post

I am learning by reading your every post, Sir.... and.... seeing an occasional Yami

XoDiViAoX · 07-23-2010, 08:29 PM

thanks for the responses im on a g2, where is the throttle adjustment at? i've got my governor opened all the way up and ill check that microswitch too .. does g2 have the sheet metal underneath? rivots are holding the floor mats on

scottyb · 07-23-2010, 08:32 PM

Thank you for the additional info ..... can you back off on the governor adjustment and tell us if the problem resolves itself?

XoDiViAoX · 07-23-2010, 08:38 PM

sure i can, ive had the governor in for a couple of months and it just started this yesterday but i'll run the nut back out to about half-way and see what happens

sabercat · 07-23-2010, 08:38 PM

the cable adjustment from petal to gov. is under that sheet metal by the petal, and the cable from gov to carb adjustment is by the carb. might have to do a little on both.
also backing off on the gov a bit might do it if you adjusted it too far

XoDiViAoX · 07-23-2010, 08:40 PM

do i need to drill the rivots out and take the floor mats up or can i get to that adjustment from the bottom on a g2?

07-23-2010, 07:50 PM	#1
XoDiViAoX Not Yet Wild Join Date: May 2010 Posts: 22	How to adjust electrical sounding click when you press gas Hi, I was wondering if anyone could tell me where you adjust whatever makes that electrical click and the golf cart starts up when you press the gas pedal. It was perfect, but something is off now and it is clicking alot where i usually cruise with the gas pedal pressed in at. Thank you
XoDiViAoX Not Yet Wild Join Date: May 2010 Posts: 22

07-23-2010, 08:13 PM	#2
sabercat gone yamaha! Join Date: Sep 2008 Location: ontario, canada Posts: 1,424	Re: How to adjust electrical sounding click when you press gas first off what cart are you on? and its most likely a throttle cable adjustment, you prob need to adjust it so the throttle opens on the carb AFTER you hear that click, and the starter gen startes up.

07-23-2010, 08:14 PM	#3
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,406	Re: How to adjust electrical sounding click when you press gas Lift the floor mat and then the sheet metal access panel by the gas peddle ... you will find the micro switch, maybe it is coming loose?

07-23-2010, 08:29 PM	#6
XoDiViAoX Not Yet Wild Join Date: May 2010 Posts: 22	Re: How to adjust electrical sounding click when you press gas thanks for the responses im on a g2, where is the throttle adjustment at? i've got my governor opened all the way up and ill check that microswitch too .. does g2 have the sheet metal underneath? rivots are holding the floor mats on
XoDiViAoX Not Yet Wild Join Date: May 2010 Posts: 22

07-23-2010, 08:32 PM	#7
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,406	Re: How to adjust electrical sounding click when you press gas Thank you for the additional info ..... can you back off on the governor adjustment and tell us if the problem resolves itself?

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

07-23-2010, 08:38 PM	#8
XoDiViAoX Not Yet Wild Join Date: May 2010 Posts: 22	Re: How to adjust electrical sounding click when you press gas sure i can, ive had the governor in for a couple of months and it just started this yesterday but i'll run the nut back out to about half-way and see what happens
XoDiViAoX Not Yet Wild Join Date: May 2010 Posts: 22

07-23-2010, 08:40 PM	#10
XoDiViAoX Not Yet Wild Join Date: May 2010 Posts: 22	Re: How to adjust electrical sounding click when you press gas do i need to drill the rivots out and take the floor mats up or can i get to that adjustment from the bottom on a g2?
XoDiViAoX Not Yet Wild Join Date: May 2010 Posts: 22

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Good sounding horn?	Electric EZGO
Press the gas but barely moves now	Electric EZGO
A-Frame or regular Shop press	Garage and Workshop
press brake	Design Center
EZGO Reverse Alarm sounding when key is off	Electric EZGO