|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
07-02-2011, 06:19 PM | #11 |
Not Yet Wild
Join Date: Sep 2010
Location: NE Georgia
Posts: 21
|
Re: G16 stops running
Ok. Help me out a little bit here... What exactly does it mean if one is hotter than the other?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-02-2011, 09:35 PM | #12 |
Not Yet Wild
Join Date: Sep 2010
Location: NE Georgia
Posts: 21
|
Re: G16 stops running
We're making progress...
I picked up an ignition tester today and finally the kids drove it enough to make it fail. Hooked up the ignition tester and got no spark from the wire. Just for kicks, I hooked the wire back to the plug and it still wouldn't fire. I needed this since this is my first try with an ignition tester. Tried a little later and still nothing. Finally, after it cooled down enough, I got the tester to spark. Hooked the wire back to my plug and got the cart to run. So at this point I'm feeling pretty confident that I've found the problem. Unless someone sees something wrong with what I've done, I'll order a new TCI by Tuesday. HUGE THANKS to you guys for guiding me along! I got this cart as a hunting cart and I wanted to learn more about small engines. So, I'm getting my education... |
07-02-2011, 09:48 PM | #13 |
Not Yet Wild
Join Date: Sep 2010
Location: NE Georgia
Posts: 21
|
Re: G16 stops running - Build Pics
So here are my before and after shots. It wasn't a bad G16 when I picked it up for $850 last fall. I wanted if for hunting. Here's all I did. Mostly with help from this forum...
Yamaha Tune Up Kit Jakes 6" lift 22X11X10 Duros ReUpholstered Seats to Black (front and back) Jakes Power Clutch Spring New Front Shocks Painted John Deere Green (ref: To Rattle Can?) Fixed headlights, Added tail lights Windshield RearView Mirror New Yami emblem on front Trailer Hitch Again, Most all I did was researched here first. THANKS! |
07-02-2011, 10:46 PM | #14 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: G16 stops running
Mr. Block, you work on cars for a living, and I don't. Therefore I read everything that you type and try to retain as much as I can. When you suggest a certain procedure, weather you explain the reason why or not, I have found it beneficial to follow your instruction.
Therefore I always prefer the Masters watch what I say, and correct me if I ever start off in the wrong direction. I for one am happy you guys hang out here for a few minutes every day. Thanks!! -- PS. Even if I do give you a hard time every chance I get!! And Back, I hope what ever you did, fixed it!! I guess not. But it looks good anyway! I think you do need the TDI. Unless someone comes in here and tells you something different! |
07-03-2011, 09:33 AM | #15 |
Not Yet Wild
Join Date: Sep 2010
Location: NE Georgia
Posts: 21
|
Re: G16 stops running
Is there anything besides the ignition coil that needs to be ordered?
http://www.everythingcarts.com/p-171...g20g21g22.aspx |
07-03-2011, 09:39 AM | #16 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: G16 stops running
Back, thats not the part. You need the cdi ignition module. Black box
|
07-03-2011, 09:42 AM | #17 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: G16 stops running
I would also put a cigerete lighter in, for emergency, to start a fire if ever stranded. Never know what might happen!!
gonna go look for cdi Only thing I can find, is an "ignition relay" for a 16. I don't know if that is the whole, (what I call the igniter) ignition module for a G16. Someone will come in here and help you that knows! If when you do start hunting, if your alone, I would make sure I have a very good battery in my car as well. Personally, I have the same battery in my golf car that I have in my pick-up, so I can switch any time a problem might arise! |
07-03-2011, 11:16 AM | #18 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,868
|
Re: G16 stops running
Yep, the coil is the TCI on all Yamaha's G16 and up. Part # JN6-85640-01-00.
|
07-04-2011, 06:38 PM | #19 |
Not Yet Wild
Join Date: Sep 2010
Location: NE Georgia
Posts: 21
|
Re: G16 stops running
Thanks guys! I'll let you know how the install goes...
|
07-09-2011, 02:13 PM | #20 |
Not Yet Wild
Join Date: Sep 2010
Location: NE Georgia
Posts: 21
|
Re: G16 stops running
The part (TCI ignition coil - JN6-85640-01-00) arrived on Thursday. I finally had time to get to the install today.
It went pretty smooth. The install took a little over an hour. So far so good. The yami runs good after install. I won't know for sure until it is put to the test over time. I wanted to thank you guys - block and mike especially - for walking me through the troubleshooting!!!! I'll update in a few days and let you know if this did the trick. |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
1993 cc keeps running when it stops | Gas Club Car | |||
88 club car stops running | Electric Club Car | |||
G2 stops running | Gas Yamaha | |||
stops running | Gas EZGO | |||
G2 stops running | Gas Yamaha |