|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-27-2012, 10:53 PM | #1 |
Getting Wild
Join Date: Aug 2012
Posts: 100
|
98 Series cart front leaf spring issue
Idk if im missing something but went to go remove the front spring and ran into a problem. Pulled the three bolts off the axle no issue. Went to remove the three bolts coming from the frame and the whole bolt spins when I tried taking the nut off. Are these bolts not welded to the frame or am I just missing how to get access to the top side of the bolts when Im doing this? I have a guy wanting to come buy the cart tommorrow and cant sell it leaning to one side so any help, I would really appreciate it.
Oh and I dont have access to a torch to heat it up and I dont really wanna use a pair of vice grips to hold the bolt while I spin the nut if I dont have to. Thanks in advance |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-28-2012, 05:06 AM | #2 |
Getting Wild
Join Date: Feb 2012
Posts: 95
|
Re: 98 Series cart front leaf spring issue
i believe the top of the bolt is under the rubber mat (carpet)
|
09-28-2012, 05:12 AM | #3 |
Gone Wild
Join Date: Jul 2012
Location: Climax,NC
Posts: 268
|
Re: 98 Series cart front leaf spring issue
Yea its under the mat. There not welded. Mine was rusted out or the heads was so i just torched them out
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Front leaf spring sag on 97 DCS? | Electric EZGO | |||
Rear leaf spring issue | Electric Club Car | |||
front leaf spring | Gas EZGO | |||
Front Leaf Spring Mounting | Lifted Golf Carts | |||
I need a front leaf spring | Golf Carts and Parts |