|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-01-2013, 12:08 PM | #1 |
Not Yet Wild
Join Date: Dec 2011
Posts: 13
|
reverse alarm question
It a 2007 PDS, (fwd/rev. rocker switch)
It is possible advisable, EASY to get to ....the alarm. I would like to disable the alarm or at least tone it down. I think it's annoying and especially when I'm trying to be quiet in the woods Can you guys point me in the right direction of the how, where's and why's THANKS |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-01-2013, 12:20 PM | #2 |
Master of All Things
Join Date: May 2013
Location: West Columbia, Texas
Posts: 17,892
|
Re: reverse alarm question
you may want to take a look at this thread......
http://www.buggiesgonewild.com/elect...-up-alarm.html |
07-01-2013, 12:46 PM | #3 |
Not Yet Wild
Join Date: Dec 2011
Posts: 13
|
Re: reverse alarm question
THanks! Sorry I didn't think to search it.
To be honest, I really would like to just quiet it down. I did consider the safety issues and did not know about the diags...... So how easy is it to get to? I will be happy just toning it down a bit. I thought about tape earlier and it seems that's what some folks do. (The ear plug is a good idea) Do I have to drill out all the rivet to get to it? Or is there access to it that I just haven't found? Not trying to by bypass the safety or step on toes..... |
07-01-2013, 12:53 PM | #4 |
Gone Wild
Join Date: Jul 2010
Location: Peachtree City, Ga.
Posts: 2,759
|
Re: reverse alarm question
Get a giant common screw driver and remove cup holder. Some pop right off and some require a little wrangling. Horn is by the key switch but easy to find. Cover hole with tape or whatever. You can tone it down a little or all the way to almost silent. Because of safety and liability it's not a good idea to disable it.
|
07-01-2013, 12:56 PM | #5 |
Master of All Things
Join Date: May 2013
Location: West Columbia, Texas
Posts: 17,892
|
Re: reverse alarm question
the alarm is behind the dash near the key switch. to get at it you would need to remove the two rivits at the bottom of the mounting plate and lift up at the bottom. its not a lot of room......but that is where its at. OR pry off the cup holder at mentioned above and use a inspection mirror to look for it...
|
07-01-2013, 01:03 PM | #6 |
Gone Wild
Join Date: Jul 2010
Location: Peachtree City, Ga.
Posts: 2,759
|
Re: reverse alarm question
Reverse buzzer looks like this:
|
07-01-2013, 01:16 PM | #7 |
Not Yet Wild
Join Date: Dec 2011
Posts: 13
|
Re: reverse alarm question
Thanks
|
07-02-2013, 09:07 PM | #8 |
Gone Wild
Join Date: May 2012
Location: S. Fl
Posts: 237
|
Re: reverse alarm question
I wrapped my in tape and its almost too quiet now.
|
07-03-2013, 05:29 AM | #9 |
Getting Wild
Join Date: Sep 2011
Location: East Greenbush N.Y.
Posts: 92
|
Re: reverse alarm question
I recently purchased an L6 and wanted to disable or tone it down. I just reached up behind the dash via the inner flender well on the passenger side and found the buzzer with my hand and pulled one of the wires off. Perfect, no issues.
|
07-03-2013, 07:13 AM | #10 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: reverse alarm question
For the physical location of the beeper, look at the left side of the passenger side glove box, you'll see two pop-rivets. That is what holds the beeper in place.
I gained access to it to quieten it down while installing the keyswitch/FNR switch/ DVM panel shown here: http://www.cartsunlimited.net/Digita...ry_Meters.html |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
G29 - Reverse Alarm Removal | Electric Yamaha | |||
Reverse alarm hot wired | Electric EZGO | |||
How to enable reverse alarm? | Electric EZGO | |||
Reverse alarm stuck - motor won't run forward or reverse | Electric EZGO | |||
Reverse Alarm | Electric EZGO |