lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 07-26-2017, 01:33 PM   #21
THECLUB
Not Yet Wild
Club Car
 
Join Date: Jul 2017
Location: Lafitte,La
Posts: 6
Default Re: axle bearing and seal replacement.

what about the new seal...? is that installed with the 3/4" pipe as well.?? is there a stop..?
new to this and trying to change my moms ezgo bearing and seals later this evening..

thanks
THECLUB is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 08-02-2017, 09:37 PM   #22
VanillaXtract
Getting Wild
E-Z-GO
 
Join Date: Jun 2017
Location: New Strawn, KS
Posts: 120
Default Re: axle bearing and seal replacement.

Quote:
Originally Posted by THECLUB View Post
what about the new seal...? is that installed with the 3/4" pipe as well.?? is there a stop..?
new to this and trying to change my moms ezgo bearing and seals later this evening..

thanks
There's not really a stop. I used a socket and gently banged it in until it was past the groove for the c-clip.
VanillaXtract is offline   Reply With Quote
Old 08-19-2017, 05:59 PM   #23
thebone
Not Yet Wild
E-Z-GO
 
Join Date: Aug 2013
Posts: 7
Default Re: axle bearing and seal replacement.

Love ohms law that was on all my electrician test a school before I got my electricians license my high school treacher That couldn't teach me algebra but my ele.teacher had no problem
thebone is offline   Reply With Quote
Old 04-04-2018, 06:25 PM   #24
DRAGGINZUZU
Not Yet Wild
 
Join Date: Oct 2014
Posts: 65
Default Re: axle bearing and seal replacement.

Ive been trying to find the part numbers I need for my 94 electric marathon, I have the 611931 , but i need the input shaft bearings, intermediate shaft bearings and carrier bearings as well as the two freeze plugs? am I looking in the wrong place? Id like to order them but having a hard time finding the part numbers.
DRAGGINZUZU is offline   Reply With Quote
Old 05-09-2018, 08:36 PM   #25
WinegarKelly
Not Yet Wild
 
Join Date: May 2018
Posts: 30
Default Re: axle bearing and seal replacement.

Hey guys, New member here!... Well, I have been lurking for a while. I finally signed up today!

Just wanted to say thanks, all the info above makes sense and I recently replaced the input shaft on our electric 1990-1991 Marathon cart & the motor coupler as well... Both were completely stripped.

Done the fronts already but the rear wheel bearings are really noisy... The 1990 model should be the same as you guys are talking about above, right?... As in the rear axle removal only needs the drum and the first locking "bearing" clip removed and then the axle can be pulled out, correct?

Then the next locking clip, then the seal...

Just want to make sure there is not any difference and I cant seem to find a Repair Manual anywhere for it. I did find the Parts Manual though and that helped tons!

The shop tried to charge us like $1,800 for a new electric motor and a new rearend where I repaired it myself for like $50-$60... Thanks to the info found with you guys!

Thanks again,
Kelly
WinegarKelly is offline   Reply With Quote
Old 05-13-2018, 10:11 PM   #26
cgtech
Over This Interview Is...
 
cgtech's Avatar
Yamaha
 
Join Date: Jun 2012
Location: AZ
Posts: 16,950
Default Re: axle bearing and seal replacement.

Should be the common Dana axle with a steel pan on the bottom. If so, then yes, easy.
cgtech is offline   Reply With Quote
Old 07-07-2018, 11:02 AM   #27
Nos800
Not Yet Wild
 
Join Date: May 2018
Posts: 29
Default Re: axle bearing and seal replacement.

What about the front hub bearing is there a auto equivalent?
Nos800 is offline   Reply With Quote
Old 07-07-2018, 02:19 PM   #28
Mooncarter
Gone Insane
 
Mooncarter's Avatar
Club Car
 
Join Date: Oct 2016
Location: Richmond, VA
Posts: 12,451
Default Re: axle bearing and seal replacement.

Quote:
Originally Posted by cgtech View Post
Should be the common Dana axle with a steel pan on the bottom. If so, then yes, easy.
CG, is this the same Dana rear as a Yamaha G19?
Mooncarter is offline   Reply With Quote
Old 05-10-2019, 07:49 AM   #29
Blp5172
Not Yet Wild
 
Join Date: Sep 2016
Posts: 3
Default Re: axle bearing and seal replacement.

So will the bearings sit flush with the end of the axle tube? Just passed the c clip spot?
Blp5172 is offline   Reply With Quote
Old 05-10-2019, 04:34 PM   #30
70oldsracer
Gone Wild
 
70oldsracer's Avatar
 
Join Date: Sep 2018
Posts: 779
Default Re: axle bearing and seal replacement.

Quote:
Originally Posted by Blp5172 View Post
So will the bearings sit flush with the end of the axle tube? Just passed the c clip spot?
I just did seals and bearings on my 1995 Medalist and here are a couple of pics. The axle bearing does not sit flush with the axle tube, it's just past the groove for the snap ring.
Attached Images
File Type: jpg Axle bearing.jpg (36.7 KB, 0 views)
File Type: jpg bearing seal.jpg (37.6 KB, 0 views)
70oldsracer is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
Yamaha G1 seal replacement files Gas Yamaha
Axle Bearing Electric Club Car
louder exhaust after seal replacement Gas Yamaha
Bearing replacement Electric EZGO
g1 crank seal replacement Gas Yamaha


All times are GMT -5. The time now is 12:02 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.