lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 08-19-2019, 08:26 PM   #31
Phil_Billy
Gone Wild
E-Z-GO
 
Join Date: Feb 2017
Location: Peachtree City, Georgia
Posts: 216
Default Re: axle bearing and seal replacement.

has anyone come across an axle that the new bearing will not seat ? old one slides off and the new one slides on the axle with little effort and once you pop the axle back in, its slides back and forth in the inner race of the bearing. does anyone have a fix, other than replacing the axle. I come across this problem frequently at work and was wondering if anyone else has come up with a solution other than replacing the entire axle. thanks in advance.
Phil_Billy is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 08-21-2019, 06:32 PM   #32
Cobra,1
Gone Wild
E-Z-GO
 
Join Date: Sep 2018
Location: Md.
Posts: 610
Default Re: axle bearing and seal replacement.

If you need bearing to fit tighter to the axle,assuming you have correct bearing but just slightly worn axle.
Make several “small” dimples around diameter of axles bearing surface with center punch.
This with make bearing a tighter fit onto axle.

Be aware Although I have used this method many times in automotive repairs, I have not yet replaced my rear cart axle bearings so not sure how “snug” bearing needs to be on axle.😊
Cobra,1 is offline   Reply With Quote
Old 08-21-2019, 08:50 PM   #33
Phil_Billy
Gone Wild
E-Z-GO
 
Join Date: Feb 2017
Location: Peachtree City, Georgia
Posts: 216
Default Re: axle bearing and seal replacement.

Cobra,1

in the past I have welded small tacks around the axle and filed them down. very time consuming. I hoping to have some responses regarding using Loctite 641 retaining compound or similar.

thanks for your response.
Phil_Billy is offline   Reply With Quote
Old 08-22-2019, 06:02 PM   #34
Cobra,1
Gone Wild
E-Z-GO
 
Join Date: Sep 2018
Location: Md.
Posts: 610
Default Re: axle bearing and seal replacement.

I’ve used the green lock tite before when seating a sleeve on a shaft. But it’s permenent so may make future bearing replacement a bit more difficult?
Cobra,1 is offline   Reply With Quote
Old 08-22-2019, 06:44 PM   #35
Phil_Billy
Gone Wild
E-Z-GO
 
Join Date: Feb 2017
Location: Peachtree City, Georgia
Posts: 216
Default Re: axle bearing and seal replacement.

I ordered the medium version Loctite 641, from Amazon last night. so I can hopefully remove the bearing in the future. It will be the first time I try it and it will be on my own cart. Hopefully it will help with the problem. I figure for $17 bucks over the cost of new axles, its worth a try.
Phil_Billy is offline   Reply With Quote
Old 02-20-2020, 09:14 PM   #36
rkr1
Not Yet Wild
 
Join Date: Feb 2020
Posts: 1
Default Re: axle bearing and seal replacement.

I need to check and refill the rear axle oil. I do not find the fill check oil screw. I only find the ventilation on the axle. It is a EZGO electric cart 2010.


Enviado desde mi iPad utilizando Tapatalk
rkr1 is offline   Reply With Quote
Old 02-21-2020, 12:51 AM   #37
cgtech
Over This Interview Is...
 
cgtech's Avatar
Yamaha
 
Join Date: Jun 2012
Location: AZ
Posts: 16,950
Default Re: axle bearing and seal replacement.

Quote:
Originally Posted by rkr1 View Post
I need to check and refill the rear axle oil. I do not find the fill check oil screw. I only find the ventilation on the axle. It is a EZGO electric cart 2010.


Enviado desde mi iPad utilizando Tapatalk
You should start your own thread about this, including info on the model of cart (ezgo made more than 1 model in 2010).
cgtech is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
Yamaha G1 seal replacement files Gas Yamaha
Axle Bearing Electric Club Car
louder exhaust after seal replacement Gas Yamaha
Bearing replacement Electric EZGO
g1 crank seal replacement Gas Yamaha


All times are GMT -5. The time now is 11:47 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.