97 36 volt EzGo TXT loses power on inclines

scottyb · 11-10-2016, 10:23 AM

The gassing is manditory. If the bulk charging rate is not high enough to gas the batteries they stagnate and loose capacity.
Also I suggest you get a bigger control.
And make ALL the cables the same size and quality.

crushing · 11-11-2016, 11:32 AM

Ok Johnnie and Scotty I charged it up all the way til the charger shut off. And it made a ton of difference. I am going to load up the family today to see what it does with the family on it. I still plan on doing some upgrades tho. But at least now it is WAY better. But my question is now I found some wire laying around at work and want to see which one you guys think I need to use. I dont know much about wiring so dont know the difference really between these too. I have the rolls of wire in the pic that says they are 2/0 gauge on them. Which are the ones I have coming from my motor now. Then I have the ones that are already made and they say 1AWG on them

crushing · 11-11-2016, 11:39 AM

Here is the wires I have

11-10-2016, 10:23 AM	#21
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,408	Re: 97 36 volt EzGo TXT loses power on inclines The gassing is manditory. If the bulk charging rate is not high enough to gas the batteries they stagnate and loose capacity. Also I suggest you get a bigger control. And make ALL the cables the same size and quality.

11-11-2016, 11:32 AM	#22
crushing Not Yet Wild Join Date: Jul 2016 Location: Tallahassee, Florida Posts: 22	Re: 97 36 volt EzGo TXT loses power on inclines Ok Johnnie and Scotty I charged it up all the way til the charger shut off. And it made a ton of difference. I am going to load up the family today to see what it does with the family on it. I still plan on doing some upgrades tho. But at least now it is WAY better. But my question is now I found some wire laying around at work and want to see which one you guys think I need to use. I dont know much about wiring so dont know the difference really between these too. I have the rolls of wire in the pic that says they are 2/0 gauge on them. Which are the ones I have coming from my motor now. Then I have the ones that are already made and they say 1AWG on them

Similar Threads
Thread	Forum
2002 EzGo Elect loses total power when the accelerator is fully depressed	Electric EZGO
86 DS No Power Up Inclines	Electric Club Car
1997 EZGO TXT loses power and stops	Electric EZGO
new 295 rebuild loses speed on long inclines	Gas EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum