|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-09-2018, 12:36 PM | #1 |
Not Yet Wild
Join Date: Nov 2017
Posts: 4
|
Txt 48 motor install
Installing a new D&D motor with solenoid into a 2013 TXT. Just want to make sure solenoid wired correctly. Back of solenoid pic has yellow on top left connector, blue to bottom. More concerned with diode on top. Stripe on diode look correct? Data says stripe to battery side. I assume they are talking about the silver stipe on the right side of the diode. from battery post is the right post. I know the resistor doesnt make any difference which way it faces. Anyone install one of these lately?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-09-2018, 12:41 PM | #2 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Txt 48 motor install
Diodes and resistor look right. Large wire should be at the bottom of the stack on the terminals. Why stock cables in the pictures, unless that's a 300a controller (I doubt it because fan), 6ga wire voids warranty.
|
09-09-2018, 01:01 PM | #3 |
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: Txt 48 motor install
|
09-09-2018, 01:23 PM | #4 |
Not Yet Wild
Join Date: Nov 2017
Posts: 4
|
Re: Txt 48 motor install
I have new wiring set that came from d&d to match motor. Just haven't put on yet . Thanks a lot guys.
Sent from my SM-N920V using Tapatalk |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Motor install | Electric Club Car | |||
Help - New Plum Quick Motor Install/Motor Mount | Electric Club Car | |||
New motor install | Electric Club Car | |||
Help with PQ motor install | Electric Club Car | |||
No go after motor install | Electric Club Car |