ezgo rxv

baldwin1362 · 09-30-2018, 12:20 PM

will a 1206ac 5211 controller work instead of a 1206ac 5201?

usgicollector · 09-30-2018, 12:26 PM

If your asking if the 1206AC-5201 can be replaced with a 1206AC-5211 the answer is yes.

baldwin1362 · 09-30-2018, 12:38 PM

does any wires have to be changed; and thank you for your answer!

usgicollector · 09-30-2018, 12:44 PM

Does this cart have a 5201 in it right now?

usgicollector · 09-30-2018, 12:47 PM

I do believe the 5211 takes a 48v solenoid.

baldwin1362 · 09-30-2018, 12:50 PM

thank you again ; it did have a 5201 when I bought it , it was fried. the one I bought it from said the brakes were locking up and they had cut a bunch of wires. I have put the wires back and have a 5211 .wanted to make sure about it and the wiring difference if any.

usgicollector · 09-30-2018, 01:03 PM

It will work but make sure you replace solenoid to a 48v one. And just make sure your wiring is right you don't want to blow another controller.

baldwin1362 · 09-30-2018, 01:08 PM

dosen't a 5201 and a 521 both require a 48 volt solenoid?

usgicollector · 09-30-2018, 01:13 PM

5201 took a 36v solenoid.

usgicollector · 09-30-2018, 01:14 PM

But saying that the 5201 can be reprogrammed to take a 48v solenoid.

09-30-2018, 12:20 PM	#1
baldwin1362 Not Yet Wild Join Date: Sep 2018 Posts: 4	ezgo rxv will a 1206ac 5211 controller work instead of a 1206ac 5201?
baldwin1362 Not Yet Wild Join Date: Sep 2018 Posts: 4

09-30-2018, 12:26 PM	#2
usgicollector Gone Wild Join Date: Mar 2014 Location: NE Indiana & SW Florida Posts: 3,234	Re: ezgo rxv If your asking if the 1206AC-5201 can be replaced with a 1206AC-5211 the answer is yes.

09-30-2018, 12:38 PM	#3
baldwin1362 Not Yet Wild Join Date: Sep 2018 Posts: 4	Re: ezgo rxv does any wires have to be changed; and thank you for your answer!
baldwin1362 Not Yet Wild Join Date: Sep 2018 Posts: 4

09-30-2018, 12:44 PM	#4
usgicollector Gone Wild Join Date: Mar 2014 Location: NE Indiana & SW Florida Posts: 3,234	Re: ezgo rxv Does this cart have a 5201 in it right now?

09-30-2018, 12:47 PM	#5
usgicollector Gone Wild Join Date: Mar 2014 Location: NE Indiana & SW Florida Posts: 3,234	Re: ezgo rxv I do believe the 5211 takes a 48v solenoid.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

09-30-2018, 12:50 PM	#6
baldwin1362 Not Yet Wild Join Date: Sep 2018 Posts: 4	Re: ezgo rxv thank you again ; it did have a 5201 when I bought it , it was fried. the one I bought it from said the brakes were locking up and they had cut a bunch of wires. I have put the wires back and have a 5211 .wanted to make sure about it and the wiring difference if any.
baldwin1362 Not Yet Wild Join Date: Sep 2018 Posts: 4

09-30-2018, 01:03 PM	#7
usgicollector Gone Wild Join Date: Mar 2014 Location: NE Indiana & SW Florida Posts: 3,234	Re: ezgo rxv It will work but make sure you replace solenoid to a 48v one. And just make sure your wiring is right you don't want to blow another controller.

09-30-2018, 01:08 PM	#8
baldwin1362 Not Yet Wild Join Date: Sep 2018 Posts: 4	Re: ezgo rxv dosen't a 5201 and a 521 both require a 48 volt solenoid?
baldwin1362 Not Yet Wild Join Date: Sep 2018 Posts: 4

09-30-2018, 01:13 PM	#9
usgicollector Gone Wild Join Date: Mar 2014 Location: NE Indiana & SW Florida Posts: 3,234	Re: ezgo rxv 5201 took a 36v solenoid.

09-30-2018, 01:14 PM	#10
usgicollector Gone Wild Join Date: Mar 2014 Location: NE Indiana & SW Florida Posts: 3,234	Re: ezgo rxv But saying that the 5201 can be reprogrammed to take a 48v solenoid.