|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
12-02-2018, 02:08 PM | #1 |
Not Yet Wild
Join Date: Oct 2018
Posts: 4
|
94 ezgo marathon Alltrax controller with reverse contactor problem
Just installed a new contactor from Scottyb. I have the user control with an alltrax sr 500. The two potentiometer wires go to the j4 throttle on the controller but where do the other 2 wires go that came from the forward reverse switch to the potentiometer? I cant find anything in the instructions telling me where they go. I have everything hooked up but those two wires and it runs great but the user control doesn't work at all.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-02-2018, 02:21 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: 94 ezgo marathon Alltrax controller with reverse contactor problem
The 2 wires that went from the pot to the F&R switch reduce the pot signal by 50% when they are connected to each other. You can continue to use this function with the new SR control since it actually reduces the throttle signal for slower reverse action.
|
12-02-2018, 02:45 PM | #3 |
Not Yet Wild
Join Date: Oct 2018
Posts: 4
|
Re: 94 ezgo marathon Alltrax controller with reverse contactor problem
Ok. But where would they go on the new reverse contactor?
|
|
|
Similar Threads | ||||
Thread | Forum | |||
SW202 reversing contactor and Alltrax AXE controller | Electric EZGO | |||
92 ezgo marathon w/alltrax controller | Electric EZGO | |||
Ezgo pds with alltrax dcx 400 controller with reverse problem | Electric EZGO | |||
Question/Help with SD Solenoid/SD Reverse Contactor/New Controller Wiring | Electric EZGO | |||
Help! Wiring reverse buzzer - 93 Marathon w/ HD Reversing Contactor | Electric EZGO |