1990 3PG reed valve

[bigrakoutfitter]

I am currently looking for a reed valve replacement for 1990 3pg 244cc robin,
I have had no luck in finding a new one.
does anyone know of a replacement, part number for old (24510-g1) website for purchasing would be appreciated.

[CP241]

Good luck! Your best bet will be ebay. There are no other sources. I just sold the set I had to help a member on here, and at the time there was 1 set on ebay for about $100 but it's gone now.

If your reed cage is okay check the buy/sell section here, nwocart has a set of petals for sale. But if your cage is cracked or broken, unfortunately you're going to have a tough search ahead of you

[bigrakoutfitter]

anyone know of a replacement engine????
that run forward and reverse like the original

[CP241]

Nope. Your only option is to get a rear axle out of a 93 or newer cart that had a 4 stroke. The 4 stroke rear axles had the forward/reverse stuff built into them. The 2 stroke motors ran backwards for reverse.

That's why I put a little predator engine in my 89 recently. No cost effective solutions and I don't want to put much money into it. I don't need reverse where I live so it's not a big deal, and really it's just a toy for the kids to play with.


Is your reed completely missing? Or the cage cracked? If your cage is okay but the petals are shot, you can get replacement petals. Just not the entire assembly.

[nwocart]

If you just need replacement petals, I have a set for sale for a 2 stroke 3PG. I couldn't find replacement OEM anywhere, but found a shop that made them. Ordered 2 pair and only used one set. They are brand new.

http://www.buggiesgonewild.com/golf-...3pg-reeds.html

[bigrakoutfitter]

the reeds themselves do not look bad, the cage has some type of rubber where the reed seats and is tore up enough to let some air through.
I am having a problem with fuel pouring out of intake and flooding out after putting on a new carb.
before that with old carb I wasn't getting enough fuel had to choke to even get to move, when I put it away last year everything ran fine

[CP241]

There is a gasket on either side of the reed cage where it mounts to the jug. Those are replaceable.

The fuel pouring is not an issue with the reeds, it's a typical symptom of a cheap chinese carb. Take your old carb apart, and clean it really well. The OEM carb is far superior to the chinese junk, there's a reason the OEM carb costs $190 new and chinese are less than $20 brand new...

[Shayne1134]

I currently am running a banshee 350 reed cage, it's a bit smaller so had to make an adapter plate on the engine side but seems to be working great so far, also tried the cheap chinese carb and it's not worth the headache just clean your OEM

[cabintommy]

Boysen #650

[lostboy]

Originally Posted by bigrakoutfitter

I am currently looking for a reed valve replacement for 1990 3pg 244cc robin,
I have had no luck in finding a new one.
does anyone know of a replacement, part number for old (24510-g1) website for purchasing would be appreciated.

is this it?