Ez Go Textron 26984

[jeepwm69]

Originally Posted by jeepwm69

I bought a new board for mine on ebay and it cuts on and runs, but doesn't want to cut off. I ran the cart for awhile today, and plugged the charger in at about 3PM. It SHOULD shut itself off at 16 hours if the timer on the board is at all good. If it's still running in the AM I know I have a bad board.

I drove it around yesterday, plugged it in at 3:30, and when I checked it at 10AM this morning it had shut itself off. I plugged it back in just to see what it would do, it clicked on and the amp meter jumped up and immediately started going down (as it should, since the batts were charged), and I stood around for about 15-20 min, with the amp meter hovering at about 0 for the last 10 min I was there. I think the built in timer (16 hours IIRC) cut it off, but the automatic cutoff doesn't seem to be sensing the batts are charged.

I have an original total charge (with the knob that you turn to "start") but it has a different plug on it. Would the board from the old total charge work with in the total charge III just to check and see if that is the problem?