MCOR throttle linkage adjustment?

lockman1 · 07-02-2007, 06:43 PM

I found the MCOR exploded veiw... could it be possible that one of the drive bar pegs are broken or missing???

carrollclay · 07-02-2007, 08:33 PM

I found the problem. It's the bearings in your first post. The first part in the list of your 2nd post. I just have to replace them.

carrollclay · 07-07-2007, 11:11 AM

I just got done replacing the bearings and pivot rod. THIS THING IS FAST!!! I need to get my speedo hooked up or GPS it in the mean time. I have some huge piles of dirt near my house and I can't find anything this thing wont go up wtihout a problem. Lot's of torque too! POWER! HOW EXCITING???

NO NO NO E-Z-GO! · 07-07-2007, 02:14 PM

That is GREAT NEWS!!! Glad you got everything worked out and functioning correctly.

roady89 · 07-07-2007, 03:56 PM

Yes..GREAT NEWS!

Hard to beleive something so simple as a worn bushing was causing all the trouble. I have seen stranger though...

Old Beatup 3030 · 07-24-2011, 10:22 AM

I have the same problem on my stock 07' CC. The dealer supposedly put a 19.6mph speed code on it. It takes me to deprees the pedal almost all the way to the floor to get the cart to move. Any ideas anyone? It's an 07' 48v CC. The only mods have been a lift kit and the supposed speed code for 19.6 mph by the dealer. It tops out at just over 14mph now. Thanks.

07-02-2007, 06:43 PM	#31
lockman1 What the ....? Join Date: Jan 2007 Location: N.E. Wisconsin Posts: 14,931	Re: MCOR throttle linkage adjustment? I found the MCOR exploded veiw... could it be possible that one of the drive bar pegs are broken or missing???

07-02-2007, 08:33 PM	#32
carrollclay Not Yet Wild Join Date: May 2007 Location: Chesterfield, VA Posts: 48	Re: MCOR throttle linkage adjustment? I found the problem. It's the bearings in your first post. The first part in the list of your 2nd post. I just have to replace them.

07-07-2007, 11:11 AM	#33
carrollclay Not Yet Wild Join Date: May 2007 Location: Chesterfield, VA Posts: 48	Re: MCOR throttle linkage adjustment? I just got done replacing the bearings and pivot rod. THIS THING IS FAST!!! I need to get my speedo hooked up or GPS it in the mean time. I have some huge piles of dirt near my house and I can't find anything this thing wont go up wtihout a problem. Lot's of torque too! POWER! HOW EXCITING???

07-07-2007, 02:14 PM	#34
NO NO NO E-Z-GO! Gone Wild Join Date: Dec 2006 Location: ComplainAboutNoNo'sProfile-Ville Posts: 4,995	Re: MCOR throttle linkage adjustment? That is GREAT NEWS!!! Glad you got everything worked out and functioning correctly.

07-07-2007, 03:56 PM	#35
roady89 nimda Join Date: Jun 2007 Posts: 13,022	Re: MCOR throttle linkage adjustment? Yes..GREAT NEWS! Hard to beleive something so simple as a worn bushing was causing all the trouble. I have seen stranger though...
roady89 nimda Join Date: Jun 2007 Posts: 13,022

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

07-24-2011, 10:22 AM	#36
Old Beatup 3030 Not Yet Wild Join Date: Jul 2011 Posts: 13	Re: MCOR throttle linkage adjustment? I have the same problem on my stock 07' CC. The dealer supposedly put a 19.6mph speed code on it. It takes me to deprees the pedal almost all the way to the floor to get the cart to move. Any ideas anyone? It's an 07' 48v CC. The only mods have been a lift kit and the supposed speed code for 19.6 mph by the dealer. It tops out at just over 14mph now. Thanks.