|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
11-02-2019, 08:13 PM
|
#1 |
|
Not Yet Wild
Join Date: Nov 2018
Location: gainesville fl
Posts: 35
|
Contactor help
i built a cart with two six terminal and one 4 terminal contactors none of them click when i apply 48v to the small terminals. are they polarity sensitive? and do the large lugs have to have power for them to work? this setup was to provide a reversing system for the motor
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
11-03-2019, 11:02 AM
|
#2 |
|
Gone Wild
 Join Date: Sep 2016
Location: Northern California
Posts: 1,300
|
Re: Contactor help
I’m pretty sure they should be marked if they’re polarity sensitive.
The large lugs don’t have to have power for the coil to work. Test for continuity between the two small terminals, then energize the coil (small terminals) and confirm you have continuity between the large posts when the coil is energized. |
|
|
|
|
11-03-2019, 12:47 PM
|
#3 |
|
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Contactor help
Here is the spec sheet for a W-R type 586 contactor.
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| HV and LV Contactor help | All things Lithium | |||
| Need help with contactor | Electric Club Car | |||
| Rev contactor ? | Electric EZGO | |||
| Contactor | Electric golf carts | |||
| Reversing Contactor not working? EZGO TXT 48V w/SW202 Contactor. How to test it? | Electric EZGO | |||
Linear Mode
