|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-11-2013, 05:10 PM | #11 |
Getting Wild
Join Date: Jun 2011
Location: Jacksonville, Florida
Posts: 90
|
Re: 97 EZGO electric Cart - wont move
john I haven't touch any wiring the only wiring I have done is to add 2ga wire upgrade 7 or 8 months ago and it has been working with no problems since then.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-11-2013, 05:40 PM | #12 |
Getting Wild
Join Date: Jun 2011
Location: Jacksonville, Florida
Posts: 90
|
Re: 97 EZGO electric Cart - wont move
I found the problem it was the red wire coming off the charger plug had corroded through and had come apart so it wasn't getting voltage to MS2 what strange is the back up beeper was real weak but when i reconnected the red wire it really got loud. So John you were right something wasn't wired right it was disconnected. **** and I was hoping it was the controller so I could get a new one.
|
09-12-2013, 07:06 AM | #13 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 97 EZGO electric Cart - wont move
Glad to hear you got it fixed.
Sorry that it didn't justify replacing the controller as you wanted. The really strange part is that the red wire coming out of the charger port is the power source for the beeper. |
09-12-2013, 08:45 AM | #14 |
Getting Wild
Join Date: Jun 2011
Location: Jacksonville, Florida
Posts: 90
|
Re: 97 EZGO electric Cart - wont move
That wire completes the energizing circuit for the solenoid that's why I didn't any voltage on any of micro switches. From what I understand from a local cart shop this wire would normally have fuse in it and they said they take them so that had been done before I got the cart and they installed a blade connector in and it corroded and broke. I do have a heavy duty F/R switch I am going to install next week
Thanks for the help |
09-12-2013, 09:09 AM | #15 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: 97 EZGO electric Cart - wont move
The acid vapors produced by battery charging are a constant threat to all of your crimp and bolt on connections. When replacing a crimp connection dip the bare wire into dielectric grease BEFORE putting it into the crimp connector.
I was doing this in all my service repair wiring and never had a corrosion problem with any of those connections..... hope this helps |
|
|
Similar Threads | ||||
Thread | Forum | |||
ezgo electric wont move | Electric EZGO | |||
89 electric par car wont move | Columbia ParCar | |||
1996 ezgo txt electric stuck wont move?? | Electric EZGO | |||
86 electric club car wont move | Electric Club Car | |||
85 Electric EZGO Cart wont start | Electric EZGO |