Sound right?

[Coltf1991]

Okay just want to verify with the experts that this is right.

I got my ezgo back today, and going to try and get it running one more time.

Okay, I'll put my connections in a list how I have them connected:

Cable from negative side of solenoid to B+
Cable from B+ to A2 on the motor
Cable from M- to A1 on the motor
Cable from B- to negative on battery pack
Cable from positive side of solenoid fused to positive on the battery pack

Activation circuit:

Red wire is on same post as cable coming from + on battery pack
Yellow wire is in the little terminal on that same side
Blue wire is on the opposite side of yellow
Silver band on diode is on same side as yellow wire

F2 wire to F2
F1 wire to F1

Factory harness plugged into PDS adapter

Run/Tow switch plugged in.

White from charge port to + main
Black from charge port to - main


What else am I missing or does anybody see anything wrong?

Any flow chart I should be following?