|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
06-17-2015, 04:26 PM
|
#1 |
|
Not Yet Wild
Join Date: Jun 2015
Posts: 5
|
G16a only runs decent with choke on.
Hi guys and gals. Just got my first golf cart and I'm trying to resolve an issue with it. It will only run decent with the choke on. The guy before me replaced the car, cleaned the original, replaced the fuel pump, lines, etc. I tried cleaning the original carb and putting it back on and it does the same thing.
Any chance that the filter setup on this one is causing it? It has an UNI foam filter open to atmosphere. I have read that these carts are picky about having the air box sealed. Why is that? I also have what appears to be a breather hose off the valve cover and I'm not sure where that would go either. Thanks, Frank |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-17-2015, 04:51 PM
|
#2 | |
|
maintaining a low profile
 Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,314
|
Re: G16a only runs decent with choke on.
Quote:
The hose attaches to the stock air cleaner hosing. Do you have the shroud that goes around the cylinder head? It might run hot without it. |
|
|
|
|
|
06-17-2015, 04:59 PM
|
#3 |
|
Not Yet Wild
Join Date: Jun 2015
Posts: 5
|
Re: G16a only runs decent with choke on.
thanks for the reply! Any idea where I can find out jetting info? I can buy a few and give the different ones a try. Or do people drill them out?
I do have the covers for the fan, just haven't put them on yet. Thanks for the heads up. |
|
|
|
|
06-17-2015, 05:08 PM
|
#4 |
|
Gone Wild
Join Date: Mar 2014
Location: Bountiful, Utah
Posts: 884
|
Re: G16a only runs decent with choke on.
I used a torch tip cleaner to enlarge my main jet, or drilling would be fine, just go a little at a time and test so you don't over do it.
|
|
|
|
|
06-17-2015, 07:21 PM
|
#5 |
|
Not Yet Wild
Join Date: Jun 2015
Posts: 5
|
Re: G16a only runs decent with choke on.
Thanks guys. I got it. drilled the main jet out with some number drills and it runs great now! Ended up at .052" if that helps anyone else.
|
|
|
|
|
06-17-2015, 07:32 PM
|
#6 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: G16a only runs decent with choke on.
Dont start driving it around with no shrouds, its like taking the fan off your car and driving it around, it will overheat.
|
|
|
|
|
06-17-2015, 07:59 PM
|
#7 |
|
Not Yet Wild
Join Date: Jun 2015
Posts: 5
|
Re: G16a only runs decent with choke on.
I have them all back on. Thanks
|
|
|
|
|
06-17-2015, 08:00 PM
|
#8 |
|
Not Yet Wild
Join Date: Jun 2015
Posts: 5
|
Re: G16a only runs decent with choke on.
No I gotta look into why it's so ill handling. lol. somebody did some kind of spindle flip to lift it and it handle terrible.
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| only runs with choke on | Gas EZGO | |||
| Runs on choke only!! | Gas EZGO | |||
| G2 runs on choke-only | Gas Yamaha | |||
| G14 runs well only with choke | Gas Yamaha | |||
| G16A will not start without the choke | Gas Yamaha | |||
Linear Mode
