|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
08-21-2015, 12:48 PM
|
#1 |
|
Not Yet Wild
Join Date: Jul 2013
Posts: 26
|
Broken tooth g16 camshaft
Ever run with a tooth missing from camshaft gear? ISO stock g16 camshaft. I was getting everything ready to go for reassembly of my budget rebuild of g16. last two items to wash clean were balancer and camshaft. I was blowing everything dry when I noticed a tooth missing on the camshaft. It will engage the crank gear, just wondered if anyone ever ran one that way?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-21-2015, 01:56 PM
|
#2 |
|
VC 460 CLONE GONE WILD
 Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,633
|
Re: Broken tooth g16 camshaft
Sounds like a big problem waiting to happen.
|
|
|
|
|
08-21-2015, 02:37 PM
|
#3 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Broken tooth g16 camshaft
Yeah, DONT do that. Not worth the money its gonna cost ya.
|
|
|
|
|
08-21-2015, 02:49 PM
|
#4 |
|
Not Yet Wild
Join Date: Jul 2013
Posts: 26
|
Re: Broken tooth g16 camshaft
Know a source for a used one? Also having trouble finding one for g16 on Internet.
|
|
|
|
|
08-21-2015, 03:05 PM
|
#5 |
|
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,633
|
Re: Broken tooth g16 camshaft
Mr.mike recently bought one for $80.Maybe he will jump in here.I found one on tnt golf carts for $121.Lowest i could find. Don't know where mr.mike found his.
|
|
|
|
|
08-22-2015, 08:45 AM
|
#6 |
|
Gone Wild
Join Date: Jan 2014
Location: South Jersey
Posts: 623
|
Re: Broken tooth g16 camshaft
I might have one have to check
|
|
|
|
|
08-23-2015, 06:31 PM
|
#7 |
|
Gone Wild
Join Date: Mar 2014
Location: Bountiful, Utah
Posts: 884
|
Re: Broken tooth g16 camshaft
Will cams from any other yamaha motor fit the G16??
|
|
|
|
|
08-23-2015, 06:47 PM
|
#8 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Broken tooth g16 camshaft
I believe G22 & Drive cam would also work. Those cams were designed for the larger 357 motor, not sure if the lift is different, but the general engine design is the same.
|
|
|
|
|
08-25-2015, 10:17 AM
|
#9 |
|
It's Beer Time!
Join Date: Sep 2010
Location: Vineland, NJ
Posts: 1,462
|
Re: Broken tooth g16 camshaft
I responded to this in a different thread. Here's the link.
http://www.buggiesgonewild.com/gas-y...ken-rod-2.html |
|
|
|
|
08-25-2015, 10:30 PM
|
#10 |
|
Not Yet Wild
Join Date: Jul 2013
Posts: 26
|
Re: Broken tooth g16 camshaft
I have found a used cam for $50 local pickup. I will be picking it up Thursday.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Tooth Count | Electric EZGO | |||
| EZGO Electric 22 tooth input shaft needed | Electric EZGO | |||
| Used 22 tooth stb gear w/new bearings | Golf Carts and Parts | |||
| Looking for 21 tooth input shaft | Electric EZGO | |||
| Camshaft | Gas EZGO | |||
Linear Mode
