|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
09-04-2019, 07:02 AM | #1 |
Gone Wild
Join Date: Nov 2015
Posts: 460
|
Installing piston rings G16
Putting in some new rings. Engine ran great but smoked.
Having a heck of a time getting the rings in. I have a generic ring compressor but it continues to allow the oil ring to catch before going in the cylinder. I tried a hose clamp but the area where the worm gear is keeps the clamp at an angle and allows the ring to pop out also. Any suggestions/tricks? Thanks! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
G2 - Piston Rings | Gas Yamaha | |||
Piston rings | Gas EZGO | |||
Piston and rings | Gas Yamaha | |||
New Piston Rings? | Gas Yamaha | |||
installing piston rings | Gas EZGO |