|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
02-11-2021, 06:05 PM | #1 |
Not Yet Wild
Join Date: Feb 2021
Location: Anderson, S.C.
Posts: 5
|
Predator 670 in 2001 EX GO - throttle questions
Just completed a Predator 670 installation with Vegas Carts kit. Install all good, but having issues getting full throttle travel, as welll as decreasing idle.
I am using the stock throtle cable from the Robins installation and can either adjust to make idle and not get fiull travel or adjust high and have an excessively high idle. Also having issue putting in gear when engine running (idle too high perhaps?). Recommendations, suggestions?? Thanks for your help! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-11-2021, 06:43 PM | #2 | |
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,667
|
Re: Predator 670 in 2001 EX GO - throttle questions
Quote:
|
|
02-11-2021, 06:48 PM | #3 |
Not Yet Wild
Join Date: Feb 2021
Location: Anderson, S.C.
Posts: 5
|
Re: Predator 670 in 2001 EX GO - throttle questions
Whats a good gauge for belt? I have about 1-1.5 in play when sitting static
|
02-11-2021, 06:53 PM | #4 |
Gone Wild
Join Date: Jul 2020
Location: NC
Posts: 773
|
Re: Predator 670 in 2001 EX GO - throttle questions
You need to adjust the motor closer to the transaxle. You will likely have to relocate the oil cooler as it will interfere with the gear shifter on the front of the transaxle to get enough slack. As for throttle settings, I can't help as I set up with the original cable but straight to the carb. I had to build a cable mount and an extension arm to make the throttle travel work. I also eliminated the governor. I may try to reinstall the stock throttle set up and governor. I'm afraid one of my idiot neighbors will get on it and blow it up. |
02-11-2021, 06:55 PM | #5 |
Gone Wild
Join Date: Jul 2020
Location: NC
Posts: 773
|
Re: Predator 670 in 2001 EX GO - throttle questions
|
02-11-2021, 08:39 PM | #6 |
Not Yet Wild
Join Date: Feb 2021
Location: Anderson, S.C.
Posts: 5
|
Re: Predator 670 in 2001 EX GO - throttle questions
Will do thank you!
Any idea what this linkage is on the transaxle? |
02-11-2021, 08:44 PM | #7 |
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,667
|
Re: Predator 670 in 2001 EX GO - throttle questions
...
|
02-11-2021, 09:26 PM | #8 |
Nincompoop village idiot
Join Date: Apr 2018
Location: Michigan
Posts: 9,673
|
Re: Predator 670 in 2001 EX GO - throttle questions
That’s neutral lockout.
It HAS to be perfectly centered in the detent or it will not shift into gear. That is to lock it into neutral so if you’re towing it, it won’t accidentally shift into gear. |
02-11-2021, 09:31 PM | #9 |
Not Yet Wild
Join Date: Feb 2021
Location: Anderson, S.C.
Posts: 5
|
Re: Predator 670 in 2001 EX GO - throttle questions
|
02-12-2021, 06:37 PM | #10 |
Not Yet Wild
Join Date: Feb 2021
Location: Anderson, S.C.
Posts: 5
|
Re: Predator 670 in 2001 EX GO - throttle questions
Throttle travel corrected with drilling a hole in the linkage plate, slightly aft and close to the linkage plate shaft - approx 3/8 in. Down and about 1/8-1/4 in. Aft from the original throttle cable retention bolt hole.
Now need adjust governor, travel good, too speed limited too much. |
|
|
Similar Threads | ||||
Thread | Forum | |||
EZGO TXT, Predator 670 Swap, Throttle Linkage | Big Block Talk! | |||
Predator 420 choke and throttle cable setups | Clone Engine Swaps | |||
Throttle linkage on Predator 22hp? | Big Block Talk! | |||
Predator 420 choke and throttle linkages need ideas | Clone Engine Swaps | |||
My 2001 EZ GO Predator 420 Build | Big Block Talk! |