lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 11-21-2012, 06:55 PM   #1
windsoreight
Not Yet Wild
 
Join Date: Oct 2012
Posts: 12
Default 86 Ds with 1/0 gauge wires

I have an 86 club car it has the single solenoid. I replaced most of the wires with 1/0 gauge. The only wires I didn't change were the ones on the v-Glide.Can I replace the one from the solenoid to the v-glide and from the v-glide to the last coil? It runs great now. It will do a burn out and the power is great.
windsoreight is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Analog Gauge Suggestions?, Specifically a CHT gauge Gas EZGO
Which wires to Upgrade to 2 Gauge Electric Club Car
New 4 Gauge Wires Electric EZGO
2 gauge wires.. Electric EZGO
what is the diameter of 2 gauge and 4 gauge battery wire? Electric EZGO


All times are GMT -5. The time now is 04:05 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.