04-04-2013, 01:41 PM | #1 |
Getting Wild
Join Date: Apr 2013
Location: N.E. Louisiana
Posts: 78
|
Gonna Gas It.
Just picked up a 97 EZ-GO Gas for cheap, $ 350.00 it had been setting for
a couple of years. Got it home & put a battery in , but would not start & no Fire to Plugs. After a lot of Brain Storming I decided to check the wires from the Ignition just for Fun. Ignition not even hooked up. Hooked it all up & checked Fire - Looked like a Light Display ( Oh Boy ). Changed Gas, Added Lucas Treatment & here we Go. Been running a 94 Sparky for a few years as my Hunting Ride , Lift Kit,400 amp. Altrax, 2 gauge welding leads for cables & a EMP motor for Torque. I guess what I'm getting at is what will it take to get this Gasser going ? Just ordered a Performance Kit for it - Clutch springs & Severe Duty Belt. Just checked the compression to make sure I'm not wasting my Money. One is running 162 pounds & one is 168 pounds - is that OK ? 295 Robin Set the valves at 004 - cleaned the carb. Haven't touched the governor YET |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-04-2013, 07:42 PM | #2 |
Gone Wild
Join Date: Mar 2012
Location: CENTRAL PENNSYLVANIA
Posts: 1,466
|
Re: Gonna Gas It.
We knew their was good still left in you , the dark side (electric) could not overcome the power of the force.
|
04-05-2013, 06:05 PM | #3 |
Getting Wild
Join Date: Apr 2013
Location: N.E. Louisiana
Posts: 78
|
Re: Gonna Gas It.
Got it running good , Now gotta get a Lift Kit & I don't know what kind.
Do I get a drop Axle or a Spindle Kit, ain't going Long Travel to much Money |
04-07-2013, 06:28 AM | #4 |
Gone Wild
Join Date: Mar 2012
Location: CENTRAL PENNSYLVANIA
Posts: 1,466
|
Re: Gonna Gas It.
personally i like the drop axle for the way the stress is distributed but if i do use a spindle lift it would be only from jakes , but thats just my opinion
|
04-09-2013, 09:01 AM | #5 |
Getting Wild
Join Date: Apr 2013
Location: N.E. Louisiana
Posts: 78
|
Re: Gonna Gas It.
Got my Performance Kit in ( 2 Springs & Severe Duty Belt ) Removed back clutch - pressed down clutch & removed Keeper , slowly backed off on press to keep it from flying apart No Go - That thing is rusted up so tight I fought with it for 2 days & it never came apart.
So I put the stupid thing back on the cart & moved to the Primary Clutch. Unscrewed the Bolt holding the clutch on - but there is not enough room to get it out because it hits the frame on the Drivers side P----d Me off. So I put it back on & Now all I Get out of this Whole Deal is a Belt that works Great & 2 spare Springs. |
|
|
Similar Threads | ||||
Thread | Forum | |||
Gonna try and get this G1 runing,Gonna need some help guys! | Gas Yamaha | |||
I'm gonna do it...... | Big Block Talk! | |||
Im Gonna DO IT!! | Gas EZGO |