|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
09-02-2013, 10:39 PM | #1 |
Getting Wild
Join Date: May 2013
Location: michigan
Posts: 76
|
yamaha g2 rpm gauge
hey guys I see all the threads about installing a tach gauge on golf cart but I guess I just wanted some direct input on the subject. maybe some detailed pics of hookups or links to gauges on ebay etc any help would be greatly appreciated been thinking about doing the throttle cable mod but im leary about it until I have a gauge installed and operating properly and the threads I have looked at im not sure on proper install process my cart is 92 Yamaha g2
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-03-2013, 12:44 AM | #2 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: yamaha g2 rpm gauge
G2's have a rev control built into the ignition. So a tach isn't necessary.
|
09-03-2013, 08:25 AM | #3 |
Getting Wild
Join Date: May 2013
Location: michigan
Posts: 76
|
Re: yamaha g2 rpm gauge
i understand that but I like the look of a rpm gauge and think it would be cool to see what rpms im running.. And eventually I would maybe like to swap the g9 ignitor so I can get rid of the rev limiter
|
09-03-2013, 09:33 AM | #4 |
Admin
Join Date: Dec 2006
Location: TN
Posts: 101,871
|
Re: yamaha g2 rpm gauge
Some have used one's made for a bicycle that seem to work pretty well.
|
|
|
09-03-2013, 12:38 PM | #5 |
Getting Wild
Join Date: May 2013
Location: michigan
Posts: 76
|
Re: yamaha g2 rpm gauge
rpm gauge on a bicycle?
|
09-03-2013, 01:16 PM | #6 |
Getting Wild
Join Date: May 2013
Location: michigan
Posts: 76
|
Re: yamaha g2 rpm gauge
must of thought I meant speedo gauge maybe? its ok
|
09-04-2013, 08:15 PM | #7 |
Getting Wild
Join Date: May 2013
Location: michigan
Posts: 76
|
Re: yamaha g2 rpm gauge
I know theres guys out there with tach gauge on there carts
|
09-04-2013, 08:52 PM | #8 |
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,445
|
Re: yamaha g2 rpm gauge
Look up Equus tach on here, most likely in the big block section. The one model for $60 or whatever is a nice tach and comes with a plug wire clip for the pickup. How to set it up is and ongoing thing. Sometimes they get funny at high rpm, some are modifying the wire to help, some carts they seem to work fine on.
|
09-07-2013, 07:35 PM | #9 |
Getting Wild
Join Date: May 2013
Location: michigan
Posts: 76
|
Re: yamaha g2 rpm gauge
do you know if the one from cpp is a kit with the gauge and all wiring etc I really like the look of the gauge and think it would be awesome on the cart
|
09-08-2013, 01:44 PM | #10 |
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,445
|
Re: yamaha g2 rpm gauge
I don't know people get the Equus tach at various places if that is what they have. CPP is a good place to deal with however I would guess something they carry would work well on a cart as they actually run/build carts too they are not just a warehouse. You can call them they are happy to answer questions there is at least one guy on here from there.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Gas Gauge & Volt Gauge in G16...Done! | Gas Yamaha | |||
Analog Gauge Suggestions?, Specifically a CHT gauge | Gas EZGO | |||
Gas Gauge | Gas EZGO | |||
6 Gauge Ok To Use | Electric EZGO | |||
what is the diameter of 2 gauge and 4 gauge battery wire? | Electric EZGO |