lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



Post New Thread  Closed Thread
 
Thread Tools Display Modes
Old 03-29-2008, 08:52 PM   #31
mwest
Not Yet Wild
 
Join Date: Mar 2008
Location: Mississippi
Posts: 5
Default Re: Yamaha governor bypass

great I have the best oil treatment called BiTron I am running it in the fuel plus the octane boost If you want Check Out http://mwest.bitronglobal.biz/
mwest is offline  
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 04-02-2008, 08:34 PM   #32
Yamaha4life
The Overposter!
 
Yamaha4life's Avatar
Yamaha
 
Join Date: Nov 2007
Location: Dixie
Posts: 1,586
Default Re: Yamaha governor bypass

I liked it till I saw the big thing on the main page about that lie liberals call "global warming!" I guess we all forgot about the "global freezing" democrap said we were gona have back in the seventies huh?

Sorry for going off topic I apoligize just had to say that...
Yamaha4life is offline  
Old 04-03-2008, 12:45 PM   #33
mwest
Not Yet Wild
 
Join Date: Mar 2008
Location: Mississippi
Posts: 5
Default Re: Yamaha governor bypass

you are right it did make a big diff.
what do you think
I just drilled a few holes in the air box and am going to order a K&N should i change the jetting or try the air set screw on the carb first ?
mwest is offline  
Old 04-03-2008, 01:06 PM   #34
spriddle
Admin
 
spriddle's Avatar
Yamaha
 
Join Date: Dec 2006
Location: TN
Posts: 100,692
Default Re: Yamaha governor bypass

More than likely you'll have to change the jet. More air means more gas.

spriddle is offline  
Old 04-03-2008, 07:17 PM   #35
mwest
Not Yet Wild
 
Join Date: Mar 2008
Location: Mississippi
Posts: 5
Default Re: Yamaha governor bypass

I called Don today and sent him the air box & carb
I am going to go with the power package
mwest is offline  
Old 04-04-2008, 07:43 AM   #36
spriddle
Admin
 
spriddle's Avatar
Yamaha
 
Join Date: Dec 2006
Location: TN
Posts: 100,692
Default Re: Yamaha governor bypass

Quote:
Originally Posted by mwest View Post
I called Don today and sent him the air box & carb
I am going to go with the power package
Let us know how it turns out.

spriddle is offline  
Old 04-09-2008, 04:22 PM   #37
WOOBA!
Not Yet Wild
 
Join Date: Apr 2008
Posts: 11
Default Re: Yamaha governor bypass

Gary, you da man! I did it last night and made a big difference in top end. Easy too. Took about 45 minutes. I'll have to make some very slight adjustments for the pedal because you barely hit the pedal and it MOVES.
WOOBA! is offline  
Old 04-09-2008, 08:52 PM   #38
mwest
Not Yet Wild
 
Join Date: Mar 2008
Location: Mississippi
Posts: 5
Default Re: Yamaha governor bypass

Well I just got everything done Runs realy good but I think I still need to adj.the card some . It kind of pops a little & i smell gas a lot Too
mwest is offline  
Old 04-10-2008, 07:43 AM   #39
spriddle
Admin
 
spriddle's Avatar
Yamaha
 
Join Date: Dec 2006
Location: TN
Posts: 100,692
Default Re: Yamaha governor bypass

Check the throttle to make sure it is completely closing when you let off the pedal. If not and adjusted properly, you might have to install a heavier return spring to pull the throttle back to closed. I had to do this on my G9.

spriddle is offline  
Old 04-15-2008, 04:36 PM   #40
Graham325
Not Yet Wild
 
Join Date: Mar 2008
Posts: 1
Default Re: Yamaha governor bypass

Ive got my screw turned in a bit on my g1, but I read this on bu and wondered if anyone could explain it a bit better
Quote:
Beware of using a longer screw to make your cart go faster. A longer screw puts extra tension on the govenor fork and it can actually break off in side the transmission. After that happens the fork will get munched up in the gears and bearings. Look for previous threads on how to bypass the govenor. The better bet is to drill out the govenor arm slotted hole on top so the arm free floats on the shaft.
Graham325 is offline  
Closed Thread
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha


Thread Tools
Display Modes



All times are GMT -5. The time now is 06:42 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.