|
Gas Club Car Gas DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
06-13-2016, 04:34 AM | #1 |
Not Yet Wild
Join Date: Sep 2011
Posts: 7
|
new belt didn't help with slipping
I have a 1993 carryall with a fe290 , that the belt was slipping on hills. I bought a new belt (OEM#: 1016203,)and the belt squeals and smells like rubber burning at top speed . It looks like a top speed the belt doesn't line up and it eating the sides of belt.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-13-2016, 04:40 AM | #2 |
Photoshop Guy
Join Date: Aug 2012
Location: Canal Fulton, OH
Posts: 3,845
|
Re: new belt didn't help with slipping
Is this a cart you just bought? Or is it a cart that ran fine for you for a long time and now just started doing this?
|
06-13-2016, 05:02 AM | #3 |
Not Yet Wild
Join Date: Sep 2011
Posts: 7
|
Re: new belt didn't help with slipping
no i just bought it
|
06-13-2016, 05:38 AM | #4 |
Photoshop Guy
Join Date: Aug 2012
Location: Canal Fulton, OH
Posts: 3,845
|
Re: new belt didn't help with slipping
Do you have a photo or a video to post? I'm assuming that you're running it in maintenance mode (running motor in neutral) in order to see the belt positioning at full throttle.
When the belt appears misaligned, does it lean closer at the motor or closer at the axle? Also, when you run the motor, does the belt rise up in the drive clutch (the one on the motor) and sink down into the driven clutch (the one on the axle)? |
06-13-2016, 06:33 AM | #5 |
Not Yet Wild
Join Date: Sep 2011
Posts: 7
|
Re: new belt didn't help with slipping
golf cart at lake ....this is not my engine but arrow shows where belt is rubbing
|
06-13-2016, 01:56 PM | #7 | |
Photoshop Guy
Join Date: Aug 2012
Location: Canal Fulton, OH
Posts: 3,845
|
Re: new belt didn't help with slipping
Quote:
|
|
06-13-2016, 06:30 PM | #8 |
Not Yet Wild
Join Date: Sep 2011
Posts: 7
|
Re: new belt didn't help with slipping
thanks i'll check it out this weekend...if it's not opening
what do i do to fix this |
06-13-2016, 08:57 PM | #9 |
Photoshop Guy
Join Date: Aug 2012
Location: Canal Fulton, OH
Posts: 3,845
|
Re: new belt didn't help with slipping
Slip the belt off and try to somewhat carefully break it loose, or spray WD-40 or PB Blaster on it to try and help get it moving again is what I would probably do. If it still won't work you should be able to remove the center bolt and slide it off the input shaft (it's just a keyway shaft, and no special tools are needed to remove it). Then you can either tear into it to see of it can be fixed or else get a new one.
|
06-14-2016, 06:17 AM | #10 |
Not Yet Wild
Join Date: Sep 2011
Posts: 7
|
Re: new belt didn't help with slipping
thanks , i'll let you know what happens this weekend
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Belt slipping | Gas EZGO | |||
Belt slipping | Gas EZGO | |||
G22 Belt slipping | Gas Yamaha | |||
belt slipping | Gas Yamaha | |||
belt slipping when wet. | Gas Yamaha |