Calling all experts!

[dynamicrepair]

I have a 85 that is making me pull my hair out! It wasnt running good so I checked compression it was good around 130. Then I checked the crank seals and replaced them. Now when im running down the road the cart will loose power. So I ran it in the shop and found that the carb is poring out fuel out of the bowl breather. Only way this can happen in my mind is that the needle and seat isnt sealing. So I cleaned the carb, didnt help. So I replaced the carb. Didnt help. So I then adjusted the float per the EZGO repair manual. Still poring fuel. I replaced the fuel pump. No change. Replaced the carb again. No luck. Checked the reed valves they are in good shape. So my question is how is the carb getting flooded out past the float? Is it a jetting issue? It does seem to help if I close the choke just a little bit, it will reduce the amount of fuel coming out the breather. I feel like ive covered all my bases on this cart and its still acting up! Please help!!

[CP241]

Are these OEM MIKUNI carbs or Chinese "mokini" carbs?

This is common with the fake Chinese carbs

[dynamicrepair]

Good to know. Ill try a oem carb. Thanks for the quick reply

[dynamicrepair]

Where is the best place to find a oem MIKUNI carb?

[CP241]

I would try the buy/buy/sell section here and see if someone has one laying around. Or Ebay for a used one. Dont know how easy it would be to find a new one, if it's even still available. If it is, will be big bucks

[jcgonzal]

Think there are at least three of us looking for OEM Mikuni carbs at the moment [emoji2957] I got frustrated and bought another Mokini, and fortunately it’s running ok (for now).