|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
11-01-2021, 06:51 AM | #1 |
Not Yet Wild
Join Date: Jun 2021
Posts: 9
|
Clutch issues
I have a 2000 G16. Installed Plowman's primary (team) and secondary clutch. Cart has ran fine for a few months. Now the primary is making a loud rattling noise. I pulled the cover off and all appears to be in good condition. When slowing down/ coming off the accelerator the cart will grab. Looking at the secondary helix you can see where it rides fine on the rubber but also has metal on metal contact like it were to spin the opposite way. I can grab some pics of that later. Any thoughts?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-04-2021, 12:16 PM | #2 |
Not Yet Wild
Join Date: Jun 2021
Posts: 9
|
Re: Clutch issues
UPDATE: Don wants me to pull off the primary send it back so he can take a look.
|
11-04-2021, 01:02 PM | #3 |
Gone Crazy
Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 6,021
|
Re: Clutch issues
Not making excusses but like everybody these days, he's probably short on employee's and up to his eyeballs in poo poo.
He's stand up, give him a minute...... Pictures would help |
11-04-2021, 01:26 PM | #4 |
Not Yet Wild
Join Date: Jun 2021
Posts: 9
|
Re: Clutch issues
Just got off phone with him, he wants the primary back to take a look at it. The metal on metal is normal. It rides that way in reverse and on the rubber in forward which i was aware of that.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
G14 Clutch Issues | Gas Yamaha | |||
clutch issues? | Gas EZGO | |||
clutch issues | Clone Engine Swaps | |||
Clutch issues | Gas Harley Davidson | |||
Clutch issues, help please. | Gas Club Car |