|
|
|||||||
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
09-14-2010, 11:09 AM
|
#1 |
|
Not Yet Wild
Join Date: May 2009
Posts: 56
|
forward to reverse shift is hard
forward to reverse shift is hard can it be lubed or do I need to replace something
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
09-14-2010, 12:21 PM
|
#2 |
|
Respect the Cart
 Join Date: May 2010
Location: Rocky Mount, Virginia
Posts: 2,190
|
Re: forward to reverse shift is hard
Does the reverse buzzer work correctly? I mention this as mine slipped off the cam and got chewed up causing the action to become difficult.
|
|
|
|
|
09-14-2010, 01:04 PM
|
#3 |
|
Not Yet Wild
Join Date: May 2009
Posts: 56
|
Re: forward to reverse shift is hard
buzzer works ok
|
|
|
|
|
09-14-2010, 01:33 PM
|
#4 |
|
Not your usual outlaw
Join Date: Oct 2008
Location: Near Lake Geneva, WI
Posts: 20,054
|
Re: forward to reverse shift is hard
What year and model is it? Does it idle or start with the pedal??
|
|
|
|
|
09-14-2010, 05:39 PM
|
#5 |
|
Not Yet Wild
Join Date: May 2009
Posts: 56
|
Re: forward to reverse shift is hard
1985 gas it will idle and go with pedal
|
|
|
|
|
09-14-2010, 05:43 PM
|
#6 |
|
Not your usual outlaw
Join Date: Oct 2008
Location: Near Lake Geneva, WI
Posts: 20,054
|
Re: forward to reverse shift is hard
Sorry, that's a little early for my knowlege. Some of the smart guys will be along soon.
Good luck |
|
|
|
|
09-14-2010, 05:44 PM
|
#7 |
|
Gone Crazy
Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 6,021
|
Re: forward to reverse shift is hard
Disconnect the cable from the transaxle and if it still shifts with difficultly you need to replace the cable.
If it becomes easy you might check the lube level in the rear. |
|
|
|
|
09-14-2010, 08:52 PM
|
#8 |
|
Hammer Down !!!!
Join Date: Jun 2010
Location: Lake Geneva, WI
Posts: 2,681
|
Re: forward to reverse shift is hard
Oops - Belay that last one RE the cable to the transaxle (the 80's 2PG "shifter" only controls the direction of engine rotation and polarity, and the only cables coming off it are electrical to the generator and battery) ...
Mine was a little crunchy, and I really didn't want to disassemble it so I sprayed it out real good with electrical contact cleaner while working it back and forth, then sprayed it with some "fader lube" (which is a lubricant designed for the faders on sound mixers, etc) and it's a lot better - I would imagine almost any electronic/electrical lubrication spray would work and be a lot cheaper than $24 a can for the Prosound spray (provided the contacts are a little crusty and that's where the resistance is coming from) |
|
|
|
|
09-14-2010, 09:24 PM
|
#9 | |
|
Gone Crazy
Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 6,021
|
Re: forward to reverse shift is hard
Quote:
 |
|
|
|
|
|
09-14-2010, 09:41 PM
|
#10 |
|
Not Yet Wild
Join Date: May 2009
Posts: 56
|
Re: forward to reverse shift is hard
Thanks guys, I'll lube it up and see what happens. The clutch I rebuilt with jb weld and head gasket material is still working like new yet with two tanks of gas used since I fixed it
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Alarm sounding in forward. No movement in forward or reverse | Electric Club Car | |||
| Hard to shift F/R switch lever on '98 TXT | Electric EZGO | |||
| Forward Reverse switch melted on forward...have question about replacement part | Electric Club Car | |||
| hard to shift | Gas Club Car | |||
| hard shift? | Gas Club Car | |||
Linear Mode
