|
10-05-2010, 10:29 AM
|
#1 |
|
Not Yet Wild
Join Date: Oct 2010
Posts: 1
|
grease fittings
I have a 1984 EZ-Go and need to grease the fittings, I have no knowledge on how to do this, can you walk me throught it for the first time?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
10-05-2010, 11:18 AM
|
#2 |
|
Maybe This Weekend :)
 Join Date: May 2009
Location: Lake Norman, NC
Posts: 6,411
|
Re: grease fittings
Get grease gun. Put grease gun on grease fitting. Pull handle to grease
 |
|
|
|
|
10-05-2010, 11:42 AM
|
#3 |
|
Gone Wild
Join Date: Feb 2008
Location: Anderson, IN
Posts: 535
|
Re: grease fittings
  I think he may have knew that part.... |
|
|
|
|
10-05-2010, 12:00 PM
|
#4 |
|
Maybe This Weekend :)
Join Date: May 2009
Location: Lake Norman, NC
Posts: 6,411
|
Re: grease fittings
|
|
|
|
|
10-05-2010, 12:08 PM
|
#5 |
|
Raised by coyotes
Join Date: Nov 2008
Location: Central Texas
Posts: 5,658
|
Re: grease fittings
She probably needs to know locations of the zerk fittings on this cart........
|
|
|
|
|
10-05-2010, 12:11 PM
|
#6 |
|
Maybe This Weekend :)
Join Date: May 2009
Location: Lake Norman, NC
Posts: 6,411
|
Re: grease fittings
If its the same as my old 89 there is one on the steering box where it goes thru the floor and 2 up under the front cowl where the tie rods are connected. Not sure if there is anymore
 |
|
|
|
|
10-05-2010, 12:11 PM
|
#7 |
|
Not your usual outlaw
Join Date: Oct 2008
Location: Near Lake Geneva, WI
Posts: 20,054
|
Re: grease fittings
Welcome to BGW Olivia. in the tech section is some manuals, take a look for the service manual for your make and model.
Chevy's mean  Sure, someone moves it on me  |
|
|
|
|
10-05-2010, 12:39 PM
|
#8 |
|
Respect the Cart
Join Date: May 2010
Location: Rocky Mount, Virginia
Posts: 2,190
|
Re: grease fittings
Boys will be boys. OK Olivia have a look at the steering box which is inside the cart at the end of the steering column. Right on the top in plain sight is a grease nipple. Push your grease gun onto it, you should feel a little resistance and then it will snap on. Give the gun a pump, if you have the gun attached correctly no grease will ooze out between the end of the gun and the nipple. Now give it another 5 or so pumps.
From memory I think that there are 7 grease points on the steering Now you know what the fitting looks like, look at each pivot point on the steering. If you see a nipple hook up the grease gun and pump away until you see clean grease coming out of the joint. The final step is to step back, open a beer and remind yourself how smart you are. |
|
|
|
 |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Grease fittings on yammy G2 | Gas Yamaha | |||
| grease fittings locations | Electric Club Car | |||
| Grease fittings on G9 | Gas Yamaha | |||
| g16 grease fittings??? | Gas Yamaha | |||
Linear Mode
