|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
11-16-2010, 11:47 AM | #1 |
Not Yet Wild
Join Date: Nov 2010
Posts: 2
|
Front seat measurements to make my own for 97 Medalist
My cushion is decent but the plywood is totally rotten. Wondering if anyone could measure the wood itself so i can cut one out and not have to guess and check. It is a 97 Medalist.
Thanks!! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-17-2010, 07:45 AM | #2 |
Gone Wild
Join Date: Sep 2010
Location: Decatur,IL
Posts: 553
|
Re: Front seat measurements to make my own for 97 Medalist
Since no one is answering this, couldn't you just take a big piece of cardboard and cut it to fit where the seat sits? not sure about the 97 but the older ones have a little dogleg on the sides and would be a little difficult to give a good measure for it
|
11-17-2010, 10:08 AM | #3 |
Just one day at a time
Join Date: Sep 2009
Location: South TX
Posts: 8,650
|
Re: Front seat measurements to make my own for 97 Medalist
Why not lay the rotten wood on a piece of plywood and trace it.
|
11-17-2010, 10:33 AM | #4 |
Not Yet Wild
Join Date: Nov 2010
Posts: 2
|
Re: Front seat measurements to make my own for 97 Medalist
From the looks of the cushion it is pretty much rectangular but the seal around the cushion is not in the best of shape either... I may just have to guess and check bc there is not much left of the plywood at all. The corners are completely gone. May just have to buy entire seat assembly but trying to go cheap route first bc mainly used around farm and not for looks
|
|
|
Similar Threads | ||||
Thread | Forum | |||
What year/make/model solid front axle for disk brakes? | Design Center | |||
Front cowl for my 95 Medalist | Electric EZGO | |||
Anybody make a rear seat for a G1 ? | Gas Yamaha | |||
96-03 front end on a medalist? | Electric EZGO |