|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
02-02-2013, 12:56 PM | #1 |
Not Yet Wild
Join Date: Jan 2009
Location: Apalachicola
Posts: 4
|
Rod to crank tolarances G16
Could not find any information on this so I am starting a new thread
I am rebuilding my first G16 engine (2001). When I first opened the case the cam was broken, the main bearing cap loose, and the oil slinger broken off Purchased a new standard rod and when installing it noticed a lot of play rod to crankshaft....I measure .03" difference crank to rod Would anyone know what the max tolerance is? Willie |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-02-2013, 01:21 PM | #2 | |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: Rod to crank tolarances G16
Quote:
|
|
Tags |
g16 engine |
|
|
Similar Threads | ||||
Thread | Forum | |||
New crank or not | Gas Harley Davidson | |||
Does a 2pg have a crank case pressure pickup tube inside the crank case? (pic) | Gas EZGO | |||
98 txt gas will not crank | Gas EZGO | |||
aligment of cam shaft, crank, and crank balance on g14 | Gas Yamaha | |||
94 EZ-GO gxt 804 will not crank | Gas EZGO |