|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
04-01-2013, 01:07 PM | #1 |
Not Yet Wild
Join Date: Mar 2013
Posts: 15
|
crankcase seal g1
Can somebody help with replacement of crankcase seal? Do i need the clutch tool or can you get it off with other ways?? im installing jakes lift and have to make room for the clutch bolt in the frame and thought i would replace crankcase seal while im in there anyways, there was little muck and grime behind clutch so thought it made since. ANy help would be awesome, thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-01-2013, 01:34 PM | #2 |
Not Yet Wild
Join Date: Feb 2011
Location: Onekama, Michigan
Posts: 62
|
I have heard you need the toll to remove the clutch but i have taken mine off multiple times and have never needed the puller, it has always just slipped off.
|
04-01-2013, 05:09 PM | #3 |
Gone Loco
Join Date: Aug 2012
Location: Cuyahoga Falls, Ohio
Posts: 722
|
Re: crankcase seal g1
My guess is you will need the puller. Mine was a bear even with it so I used some water in the hole before i put the tool in and the hydraulic pressure pulled it off. Don't forget the seal on the other side. Try to take it off without and see what happens. Good luck
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Crankcase seal replacement fan side G1 | Gas Yamaha | |||
G16 crankcase | Golf Carts and Parts | |||
do i need crankcase oil in pg2 ?? | Gas EZGO | |||
crankcase gas | Gas Yamaha |