|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
04-03-2013, 06:13 PM | #1 |
Not Yet Wild
Join Date: Mar 2013
Posts: 15
|
Bumper ideas
Ok I got my g1 all painted up and tuned (runs like a striped *** ape!) waiting on my 6" jakes to arrive so with the free time I need to get the bumpers done. What I was needing was some good ideas to go with, I don't want to go with the stock ones that about all I know! Any ideas would help........thanks dudes
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-03-2013, 08:05 PM | #2 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,442
|
Re: Bumper ideas
As long as I've been working on mine, I've never seen anyone come up with a good idea for G1 bumpers. I've even searched....nothing. I still have my stock bumper on the rear of mine.
|
04-04-2013, 05:57 AM | #3 |
Gone Wild
Join Date: Aug 2012
Location: Colona, Illinois
Posts: 473
|
Re: Bumper ideas
I bought an older brush guard from the local Polaris dealer for $25 and did some mods to it for the front. The rear I built out of 1 1/2" tubing. Like it a lot.
|
04-04-2013, 06:52 AM | #4 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,442
|
Re: Bumper ideas
Gray, did you use the stock bumper frame mounts? I'd like to see that....
|
04-05-2013, 06:47 AM | #5 |
Gone Wild
Join Date: Aug 2012
Location: Colona, Illinois
Posts: 473
|
Re: Bumper ideas
Slo, I used the holes/brackets in the frame as mounting points and fabbed up plates out of 1/4" flat stock to bolt to them. On the front bumper I cut the ends on the mounting tabs at an angle to match the stock brackets on the frame and welded them to the plates I made. In the back I welded 6" long pieces of 1 1/4" tubeing to the plates and the bumper and bolted to the original mounting holes. Will get some pics if you want.
|
04-06-2013, 05:40 AM | #6 |
Not Yet Wild
Join Date: Mar 2013
Posts: 15
|
Re: Bumper ideas
Gray those look sharp! I was think some similar but like to see how they look on a cart already! Great job one yours
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Need front bumper Ideas | Gas Yamaha | |||
Bumper | Members Rides | |||
club car winch bumper and read bumper | Gas Club Car | |||
VW bug bumper on CC | Design Center | |||
Ideas For Fabricated Bumper G1 | Gas Yamaha |